$20.00 - $399.00
Min. Order : 2 Pieces

e1 to ethernet Interface/protocol converter

Get Latest Price
Trade Assurance
Built-in order protection service in alibaba.com
Product quality
On-time shipment
More on shipping and other trade services.

Quick Details

Port: ShangHai,ningbo
Payment Terms: L/C,T/T,Western Union,PayPal
Supply Ability: 1000 Piece/Pieces per Week
Brand Name: FCTEL
fiber: FC,SC
Place of Origin: Zhejiang China
size: desk-top
color: gray
Ethernet: 100Mbps,rj45
E1: 75ohm(BNC)/120ohm(rj45)
Model Number: FCC-E1F1
Power: redundantly,AC,DC
Delivery Detail: 7 days
Packaging Detail: standard export carton packing Size :274X193X84 mm(WXDXH) Weight :1.1KG
Hangzhou Fctel Technology Co., Ltd.
Supplier
CN
Manufacturer, Trading Company
85.7%
Response Rate
95.2%
On-time delivery rate
US$ 10,000+
21
Transactions
101-200
Employees
21-30
R&D staffs
0
Patents
Visit Store

 E1 to ethernet Interface/protocol converter

 

 

 

Product Overview

  1. This interface converter is based on FPGA chip,providing one framed E1 interface and one Ethernet interface to achieve 10/100Base-T Ethernet data transmission on the E1 channel.
  2.  It is a high performance, self-learning Ethernet bridge.
  3. This device is the extension device of Ethernet, using network (PDH/SDH/Microwave) that provide E1 channel to achieve local and remote Ethernet interconnecting with serial interfaces at a lower cost.
  4. The device has inter-set loop test function to facilitate the project launching and daily maintenance.

 

Features

  • Can realize monitor and control of remote equipment, OAM management data did not  take up user’s timeslot and save E1 bandwidth
  • E1 supports any timeslot set, the rate is 64K-2048K
  • The local device can forced the remote device rate follow it
  • Have the function of E1 interface loop back check, avoid the converter crashed because of interface loop return;
  • Have indicator  when the device is power-off or E1 line is broken or lose signal;
  • Can set the E1 line that not to send the LINK signal to Ethernet interface while E1 line is broken;
  • The Ethernet interface supports jumbo frames (2036 Bytes);
  •  Inter-set dynamic Ethernet MAC address (4,096) with local data frame filtering
  • Ethernet interface supports10M/100M, half/full duplex auto- Negotination and AUTO-MDIX
  • Have Ethernet monitor self-reset function, the equipment will not dead
  • Can achieve the remote device setting any 5 mode of Ethernet and can closed the AUTO-MDIX function;
  • E1 master clock and E1 line clock;
  • E1 interface Loop Back (ANA),Ethernet interface Loop Back(DIG),Command the remote Ethernet interface Loop Back(REM)
  • 75 Ohm unbalance and 120 Ohm balance;
  • SNMP Network Management;
  • Can realize monitor of remote equipment temperature and voltage from local equipment;

Technical parameters

 

E1interface Interface Standard:Comply with protocol G.703
Interface rate:n*64Kbps±50ppm;Interface Code:  HDB3;
E1 Impedance:  75Ω (unbalance), 120Ω (balance);
Jitter tolerance:  In accord with protocol G.742 and G.823
Allowed Attenuation:   0~6dBm
Ethernetinterface (10M/100M)Interface rate:10/100 Mbps,half/full duplex auto-negotiation
Interface standard:Compatible with Ieee802.3,IEEE802.1Q9(VLAN)
MAC Address Capability:4096
Connector:RJ45,support Auto-MDIX
EM 2/4 LineAD:odB
DA:-3.5dB
Two/Four-line impedance:600 ohm
Return loss:20dB
Powerpower supply:AC180V-260v;DC-48V;DC+24V
Powerconsumption:≤10W
Dimensionproduct size: 216X138X31 mm(WXDXH)
Simple packaging :274X193X84 mm(WXDXH)
Piece Weight :1.1KG 
Working environmentworking temperature:-10°C ~ 50°C
Working Humidity:5%~95 % (no condensation)
Storage temperature:-40°C ~ 80°C
Storage Humidity:5%~95 % (no condensation)

 

Networking Application

 

application.jpg

 

 

Promise

  • OEM manufacture
  • Best chips,handwork paster,48hours test and aging
  • 3years warranty
  • lifetime after-sales   

 

Certificates

.jpg

paste-pic-dp_uuid_xiwqx