quick dry silicone adhesive for rubber keypad

$1.00 - $2.00
Min. Order
1 Ton
Company Information

Shenzhen Kanglibang Science & Technology Co., Ltd.

CN Manufacturer
Response Time
Response Rate:
8 Years Paid Supplier Gold Supplier Onsite Check
Learn More

Quick Details

Port: FOB
Payment Terms: L/C,T/T,Western Union
Supply Ability: 100 Ton/Tons per Month
CAS No.: 67763-03-5
Other Names: Heat curing silicone adhesive
MF: H4Si
Place of Origin: China (Mainland)
Classification: Volatile Solvent Adhesives
Main Raw Material: Silicone
Usage: Construction,Fiber & Garment,Footwear & Leather,Packing,Transportation,Woodworking,Kitchen ware
Model Number: CL-24
Name: silicone adhesive
Application: Kitchen ware,stainless steel and iron
Appearance: Transparent
Drying condition: Natual 30 minute
Crosslink temperature: 170℃
Temperature resistance: -60~280℃
Certificates: FDA | RoHs | CE | MSDS | REACH....
Feature: Water resistance and high temperature resistance
Origin: Shenzhen, China
Load Port: Shenzhen, China
Delivery Detail: 7-15days
Packaging Detail: Plastic bottle, Carton or Accordance with customers requirements.

Silicone  Primer KN-300X





KN-300X is silicone adhesive which used for cured silicone rubber bonding cured silicone rubber at room temperature.1.jpg


  No Whity, No getting hardened after the KN-300X cured

                                                   99% of OK Rate. 3.png

Bonding Strength

Tear to break silicone rubber

Glue amount drops to 75%, Bonding effect 30% higher4.png



FDA Complaince (Food And Medical Grade) AND  Excellent insulation                                                                                                                                          


Physical Properties.png


 Appearance:  colorless and semi-transparent paste

Viscosity:         50000cps

Elongation:     400%

Hardness:       35A


Usage One: Silicone rubber to silicone rubber at room temperature.


1, Cleaning: Cleaning the bonding surface.

2, Gluing: The distribution of the silicone glue on bonding surface had to be even and less than 5mm

3, Pressing: More than 120 munites of pressing. The glue reaches complete cure after 24 hours at 25℃.




Usage TWO: Silicone rubber to plastic at room temperature


1, Cleaning: Cleaning the bonding surface with toluene or absolute ethyl alcohol.

2, Activating: Brushing fewer adhesive(CL-24J) on the cleaned surface. (single brushing is enough)

3, Curing: Curing at room temperature for 30minutes

4, Gluing: After adhesive cured, brushing KN-300 on the bonding surface, pressing over 120minutes. Absolutely cured after 24 hours at 25℃






1, Need to clean surface for bonding, avoid the greasy dirt.
2, Make sure uniform pressure to keep bonded parts together.
3, KN-300X is easy to cure once contacting with moisture, it must be stored in a completely sealed packaging and away from the away from light and hot.
4, Avoid eye contact adhesive. If contact, rinse with water immediately, then go to see the doctor.
5, Please fasten down the the caps after using to avoid the gel to be cured.





100g/tube, 330g/tube





shelf life for 3 months, stored at         20℃-25℃ dry place, away from light and heat.