|RF frequency:||2MHZ- 4Mhz|
|Place of Origin:||China|
|After-sales Service Provided:||Video technical support|
|Control Display:||8.4inch color touch screen|
|Feature:||Face Lift,Skin Rejuvenation,Wrinkle Remover|
|Voltage:||AC 110V/220V; 50HZ/60HZ|
|Needle cartridges:||10pin, 25pin, 64pin|
|Suction level:||2 level|
|Application:||Rf microneedle,For Commercial|
|Packaging Detail:||Foam, original aluminum box, carton. Packaging weight: 22kg Packaging size: 55x41x40 cm|
|Selling Units:||Single item|
|Single package size:||55X41X40 cm|
|Single gross weight:||22.0 KG|
Voltage: AC 110V/220V; 50HZ/60HZ
RF frequency: 2MHZ- 4Mhz
RF power: 10-200W
Needle cartridges: 10pin, 25pin, 64pin
Needle Thickness: 0.3mm
Needle Depth: 0.2-3.5mm(0.1step)
Treatment Duration: 0.1~0.6s
Suction level: 2 level
Control Display: 8.4inch color touch screen
RF microneedle radio frequency
1. Treatment with vacuum more comfortable.
2. Non Insulated Needles: It is possible to operate equal therapy to Epidermis Layer and Dermis Layer as the needle do not have Insulation Plating.
3. Stepping Motor Type: Different to existing Solenoid Type, the needle Inserts to the skin smoothly with no shock, and causes no bleeding and no pain after the procedure.
4. Gold Plated Needles: Needle is durable and also has high Biocompatibility by applying Gold Plating. Patient with metal allergy could also use it with not concerning Contact Dermatitis.
Fractional RF Needle System through the special design of many fractional needles point array, the high speed digital motor controls order through the epidermis and the dermis accurate to control the depth of 0.25-3mm, again by the end of the lattice needle release RF, stimulate collagen and elastic tissue, and is the epidermal layer is safe, RF energy can well to penetrate to the dermis, stimulate collagen protein hyperplasia, not only is the best way to improve the scars, but also long term tightening skin wrinkles induced the good method.
What is RF micro needling machine?
Gold RF microcrystalline is a combination of microcrystalline and radiofrequency, About the treatment, the doctor should be according to the crystal pair problem with the treatment site, adjust the microcrystal penetration depth and RF energy, and then under the control of the electronic system, dozens of insulated microcrystalline at the same time quickly penetrate.
Epidermis should be from the microcrystalline crystal tip radio frequency energy, then quickly exit, repeat the same operation until the treatment is completed.