This machine is the latest new high-efficiency Drag finishing machine. It has the feature such as high automation degree, fine looks, easy operation, and wide range of speed adjustment, smooth running, and low noise and so on. The top of machine equip with 1 each one level and 4each two level rotating disks by K series reducer motor, it has 6teams rotatable and quick dismantled clamp on the each two level rotating disk, and it is installed automatically lift device and movable vessel. When the workpart are clamped to the rotating disk running, the vessel should be gone up to the proper position by automatically lift device, and then the process begin. Because the media is immovable, the workpart on the clamp high speed rotation by two level rotation disk, at the same time revolution by one level rotation disk, to make workpart and media cause the strong friction, and let the workpart finish grinded and polished completely. It is used in drill, milling cutter and thin workpart and medical components; it is best high- efficiency machine for cutting tool line.
Electrical system and drawing. 1. This machine adopts PLC digital control system and international brand inverter, to make workpart clamp change speed in 0~160rpm to meet different workpart demands.
Installation and adjustment. 1. a. The machine must be mounted on a flat concrete floor; four feet must touch the floor firmly.
2. b. The motor winding, the magnetizing windings and the speed windings should be tested by 500 megameter, the insulation must be over 0.38 megohm.
3. c. Start the machine and try to operate indication button, Check the earth wire, be sure that it is in good working condition to avoid any accident.
Our laboratory services are available to you at no cost. Mass Finishing and determination of Process Capability allows you to use the right media to ensure consistent production capability and built-in reproducibility of your manufacturing processes. We will work with you to determine the best media and the best processes for your parts. This step can result in: * Reduced Cycle Times * Improved RMS Finishes * Reduced Finishing Costs * Access to Latest Technology * R & D for Special Process Media
Mass Finishing describes a mechanical process where large amounts of parts are economically processed to achieve one or several surface improvement functions. These surface improvement functions include: * Cleaning * Deburring * Surface refinement * Inhibiting * Drying
These functions are not independent of each other. It is common to have several or all of these functions take place in a single mass finishing process. Process Capability is the measured, built-in reproducibility of the product turned out by the process. Such a determination is made using statistical data, not wishful thinking. Statistically determined limits are compared to specification limits to decide if a process can consistently produce acceptable product. Process capability is best established through closely monitored testing and recording of data over a set period of actually production.