Ready to Ship
Fast dispatch
In stock

universal remote controller AC220V 433mhz for garage door opener side motor

$13.00
1-99 Sets
$10.00
100-999 Sets
$9.80
1000-2999 Sets
$9.50
>=3000 Sets
Min. Order
1 Set
Note: Please be cautious and check with your supplier if this product is for virus protection purposes and if the coronavirus (COVID-19) will affect your order.
Choose your specifications
Company Information

Hangzhou Zhengdian Technology Co., Ltd.

CN Manufacturer, Trading Company
Response Time
<24h
Response Rate:
90.9%
Transactions
US$ 80,000+
3 Years Paid Supplier Gold Supplier Onsite Check Trade Assurance
Learn More

Quick Details

Brand Name: ZDURC
Function: Control Garage Door Opener
Remote Distance: 50~100
Warranty: 1 Year
Place of Origin: China
Product name: Automatic Door Operators
Frequency: 315M/433.92M/other
Model Number: AKG03
Power: AC220V
Certificate: CE ROHS
Selling Units: Single item
Single package size: 14X11.5X5 cm
Single gross weight: 0.32 KG
Product Description
Controller:
1. Frequency:433MHz
2. Motor Voltage:220VAC/50hz,Power<500W
3. Remote spection:SA ABCD/12V27A,be learned about 50pcs control
4. Motor:Side/Tuler motor
5. Safeguard procedure:during the process of up or down,switch failure that motor can not stop itself,after 3minutes will stop
aumomatically to protect motor!
6. Material:PVC
7. Connection:2*4 wiring mouth 5569
8. Modulation system: amplitude ASK/OOK
9. Receive Sensitivity(dBm):-95DB
10. Working Tempeture: -10℃~+70℃
11. PCB size/Weight:95*75*30mm/132g
12. Outside case size/weight:125*85*38mm/68g
13. One kit:one controller + two pcs transmitters
14. Communication range:normally 50-100meters,test it base on actually circumstance.

How to Install
1. Power off;
2. First check the motor function,up /down/stop,all are right!
3. Then check the wire to connection the right function
There will be 6 pcs of different colors wire
Black Black:AC 220V votalogue
Red:stop
White/yellow: up/down(reverse)
Green:Common
Check the function with motor,if the same,connect direct
If not pls adjust the wire till the same function
4. Make sure the wire connection is right then test up function,if it is Down,pls reset the direction button in the side of
controller.
5. Pls use the antenna in the best place.
6. Pls install the controller near the door to reach the best communication range
7. Pls do not install in the rainy or sunshine place
8. It should be at least 30 cm between the room ceiling and controller,at least 120cm between floor and controller

Remote set instruction: 

The receiver can work with one channel and three channel.
You can judge it by the LED flash, the LED flash once and off,it is one channel, the LED flash three times and off once, that
means it is three channel.
During learning process,LED flash lower and even
1. how to learn the transmitter
We have matched transmitter and controller before ship,if you want to add additional transmitter,pls check below steps:
2. learning status(make sure the same frequency and the same chip code):
Press the learning button about 3s,led flash lower and even mean it is the learning status
Press any button in the remote for 2S,led off once,mean learn successfully
Release the button,if led still flash lower and even,mean in the learning status,pls go on learning accrording above manual.
During the process of learning,if there is not the remotes to be learned,about 3 seconds will stop the learning process,and LED
flash same with working.
3.Clear code:
Press the learning button,LED flash lower and even,after 10s,LED flash quickly mean clear code is successfully
(all remotes clear code

It can be learned about 50pcs of remotes

Controller instruction:

The receiver can work with one channel and three channel.
You can judge it by the LED flash, the LED flash once and off,it is one channel, the LED flash three times and off, that means it
is three channel.
For example:
One channel:
When button A learned in the controller,
press button A once it open, press button A again it stop, press button A the third time it close.
So same with button B/C/D,that mean one remote can control four gates

Three channel.
How to change it to three channel?
Press button D once, then press A and B at the same time, then press the button C. When the LED flash three times and off, that
means it is three channel.
Function:Press button A it open, press button C it stop, press button B it close.