Pre Heated Vacuum Tube Solar Heat Pipe Solar Water Heater

$225.00
1-29 Sets
$197.30
30-49 Sets
$182.30
50-99 Sets
$176.00
>=100 Sets
Min. Order
1 Set
Choose your specifications
Company Information

Haining Jinneng Water Heater Co., Ltd.

CN Manufacturer
Response Time
<24h
Response Rate:
100%
Transactions
US$ 1,000+
2 Years Paid Supplier Gold Supplier Onsite Check Trade Assurance
Learn More

Quick Details

Port: Shanghai or Ningbo
Payment Terms: L/C,T/T
Supply Ability: 400 Set/Sets per Month
Outer tank: Galvanized steel 0.4mm
Insulation layer: 55mm foam polyurethane
Frame: Galvanized steel
Installation: Freestanding
Place of Origin: China
Inner tank: stainless steel 304 2B
Housing Material: Stainless Steel
Material: Stainless Steel Duplex/316L/304
Model Number: JNCP12
Certification: CE,CCC, ISO
Brand Name: Jinneng
Type: Evacuated Tube
Vacuum tube: 3 layers
Angle: 20 to 45 degrees
Product name: Pressurized solar water heater
Capacity: 120
Connection Type: Direct-Plug
Collector type: Super Vacuum Tube
Application: Washing
Circulation Type: Indirect / Closed Loop (Active)
Packaging Detail: exporting cartons with foam sheet for full container packing
Product Details

Pressurized insulated storage water tank
Compact pressurized solar water heater working principle

A). The solar collector can connect to the pressured water tank and it can be installed on the flat with stand or mounting on the sloping roof without support stand
B). The heat pipe vacuum tube absorbs the heat energy from sunlight, because there is a closed-loop between water tank and solar collector, so the heat can transfer to water tank from the solar collector
C). The conduct medium is Glycol and water mixture, it can endure the very low temperature and anti freeze, meanwhile it can exchange heat energy with cold water in the water tank
D). With help of the controller system, it can balance the temperature of the water tank and the solar collector. When the temperature difference is higher than preset value, the controller system will start the circulation pump and the heat energy can be transferred between the water tank and solar collector
E). The controller can also control the electrical heater booster; The temperature can be preset with digital adjustor. When the T of the water in the water tank is higher than the preset value.
F). The water tank has a very long insulation period, so the temperature of the hot water can be protected for 72hours

Product intriduction

Compact pressurized solar water heater specifications:

1. Water tank specification:
A). Inner tank: SUS304-2B material, 100-150L, 1.2mm thickness, 200-500L 1.5mm thickness
B. Insulation: 50mm polyurethane foam
C). Outer tank: 0.5mm thickness galvanized steel material
D). P/T relief valve, electrical heater element with terminator
E). Heat exchanger: 20m, 12mm diameter, 1mm thickness copper pipe

2. Solar collector specification:
A). Frame: 2.75mm Aluminum alloy, 1.5mm thickness galvanized steel support
B). 1mm thickness copper manifold
C). Insulation: 20&25mm thickness silicate aluminum and 35mm thickness polyurethane foam
D). 1.7m long copper heat pipe, 8mm diameter, 0.6mm thickness
E). Nylon tube shoe and tube stopper, silicon gel ring
F). 58mm diameter and 1800mm long, trivalent element evacuated tubes

3. Working station specification:
A). Expansion tank: 5L volume, -10~90C operation temperature, 1Mpa maximum operation pressure
B). Circulation pump: WILO RS15/6, three phases, 220V/50Hz
C). Probe: Pressure Temperature Probe
D). Temperature sensor: Three temperature sensor Electromagnetism valve
E). Digital display: Temperature adjustor Timing water supply 

Product Parameters
Name
Specification
Brand
Material
Inner tank
Imported stainless steel 304 food grade,1.2mm thick, argon welding
Outer tank
Galvanized steel 0.4mm thick or Stainless steel 201 0.4mm thick
Insulation layer
55mm thick high density polyurthane foam
Vacuum Tube
Three layer 58x1800mm, absorb efficency 94% to 97%
Heat Pipe
14*0.6mm thick with heat transfer oil
Tank Working Pressure
4 bar, maximum testing pressure 12 bar
Frame
Galvanized steel or Stainless steel 201,1.2-1.5mm thick
Frame Angle
Angle from 20 to 45 degrees
Tank Diameter
Inner tank 360mm, Outer tank 470mm
Model  
Tube QTY 
Heat Pipe
Capacity  Liters
JNCP10
10
14*6
100
JNCP12
12
14*6
120
JNCP15
15
14*6
150
JNCP18
18
14*6
180
JNCP20
20
14*6
200
JNCP24
24
14*6
240
JNCP30
30
14*6
300
JNCP36
36
14*6
360
Product Details Show
Why Choose Us

About us

we produce different models for different market demands

Equipment & technology

nearly all haining pressurized tank supplied by us

Service

OEM solar water heater

Product Packing
Related Products

Lower solar water heater


Lower solar water heater

Split flat plate solar water heater


Split flat plate solar water heater


Split Vacuum tube solar water heater


Split Vacuum tube solar water heater

Flat plate solar water heater


Flat plate solar water heater


Vacuum tube solar water heater


Vacuum tube solar water heater

Vacuum tube solar water heater


Vacuum tube solar water heater