High Pressure Oil Rail Leak Repair Kit Tool O-rings & Injector Seal For 03-10 Ford E-350 E-450 F-250 F-350 F-450 F650 F750 6.0L
- For 03.9-10 Ford E-350 Super Duty V8 363 6.0L.
- For 03.9-10 Ford E-450 Super Duty V8 363 6.0L.
- For 03.9-07 Ford F-250 Super Duty V8 363 6.0L.
- For 03.9-07 Ford F-350 Super Duty V8 363 6.0L.
- For 03.9-07 Ford F-450 Super Duty V8 363 6.0L.
- For 03.9-07 Ford F-550 Super Duty V8 363 6.0L.
- For 03.9-07 Ford F650 V8 365 6.0L.
- For 03.9-07 Ford F750 V8 365 6.0L.
- For 03.9-04 Ford Excursion V8 363 6.0L.
Manufacturer Part Number: 5C3Z-9T287-ARM.(FOR FORD MOTOR COMPANY)
OE. Part Number: AP0070, ISK606, 6E7Z9A332A, W302908, 6E7Z9A332B, 904-231.
Other Part Number: AP0070, ISK606, 6E7Z9A332A, W302908, 6E7Z9A332B, 904-231, 904-293, 904-293T.
- 100% quality assurance tested,more responsive, less expensive, easier to install.
- High Pressure Ball Tubes connect the fuel injector to the high pressure oil rail.
- All of our High Pressure Ball Tubes include gaskets for a complete repair.
- Attaches to the fuel injectors and high pressure oil rail.
- Direct replacement for a proper fit.
- Frequently you will find leaks between the ball tube and the oil rail. If there is a leak at one ball tube it is probably wise to replace them all. Even if you do not find any leaks during air testing, it is wise to closely inspect the nipple portion of the ball tube where it inserts into the fuel injector.
- Since pressure in the high pressure oil system can exceed 3,500 PSI even slight surface abnormalities can result in problems over time.
Material & Color:
- Material: made of high quality Steel.
- Color: as picture.
- 1x O'Ring Seals
- 1x O'Ring Seals BIG.
- 1x O'Ring Seals MID.
- 1x Steel Snap Rings.
- 1x Injector D-Rings.
- 1x Upper Injector O-Rings.
- 1x Lower Injector O-Rings.
- 1x Copper Crush Washers.
- 1x Outer Injector Harness O-Rings.
- 1x Inner Injector Harness O-Rings.
- 1x Removal Tool. (100% Brand New Never Used Or Installed)