|Payment Terms:||L/C,T/T,Western Union|
|Usage:||Water Treatment Chemicals|
|Place of Origin:||shenzhen,China|
|Classification:||Chemical Auxiliary Agent|
|PO43:||A: 35.0% B:45%|
|Component:||polyphosphate and nonionic surfactants|
|Appearance:||white or light yellow paste|
|Packaging Detail:||Packaged in wide mouth plastic bucket. Net weight/bag:25-100kg or according to the client's requirements.|
Chemical cleaning agent
polyphosphate and nonionic surfactants
A: 35.0% B:45%
PH value(10g/L aqueous solution)
Better water solubility
Quickly remove oil, iron, calcium and biological sludge and other dirt on the metal surface
1.Circulating cooling water system before the start of the machine.
2.Corrosions system during the operation of the machine.
3.Circulating water system in oil refinery of oil leakage
Safety and protection
1.Use with safety products such as rubber gloves, goggles..
2.Avoid contact with skin or eyes
3.In case of the careless contact, please rinse immediately with plenty of running water.
4.Other safety, medical, transportation emergency management materials, please read the safety specification.
1.Dosing concentration :500 ~ 1500mg / L
2.Please evenly and slowly impact dose or use dosing system
3. Used in the state without heat load.
4.Cleaning time： control at 12 ~ 24h or depend on the condition of the field
5.If the cleaning is carried out with heat load, please consult our technical service engineer.
1.Avoid the secondary corrosion
2.Form a dense passivation film in the surface of activated metal.
The engineers will serve you with closely cooperation
Care your operation condition at any time
In order to make full use of drugsand regularly provide the water analysis report.