|Place of Origin:||Shandong China|
|Product name:||AR glass fiber chopped|
|Application:||BMC,Themoplastic ,FRP surfaces|
|Packaging Detail:||Chopped Strand can be packed in carton boxes, composite plastic woven bags, wooden crates or bulk bags: Bulk bags and wooden boxes can hold 500kg--1000kg each; Carton boxes and composite plastic woven bags can hold 15kg--25kg each|
|Selling Units:||Multiple of 1,000|
|Package size per batch:||15X12X10 cm|
|Gross weight per batch:||1.01 KG|
Chopped strand for cement/plaster etc
It could be packed in carton boxes, composite plastic woven bags, wooden crates or bulk bags.
Special sizes according to customers' requirement!
10mm/12mm/18mm AR glass fiber chopped strand for concrete/cement/plaster
Fiberglass Chopped strand was the main raw material for Gypsum Board, Concrete Reinforcement, Cement Reinforcement and other Concrete/Gypsum Products. Fiberglass Chopped Strand is the new product for environmental protection property. It was widely used in the field of Construction Industry.
Fiberglass Chopped Strand was treated by silane coupling agent, which makes it has excellent dispersity and composition with other inorganic materials and resin for actual us
(1) Pre-mixed Fiberglass Chopped Strand
It has excellent properties with alkali resistance, stiffness, bundle – state, ageing – proof, Mixed 20 minutes in cement at 50rpm, it can still keep good bundle state, it won’t dispersed to filament.
It is a high integrity AR Glass Fiber Chopped Strands designed for use in the reinforcement of concrete, renders and mortars. It may be added to conventional
mixes either on site or by prepending with other dry mix components. The low – tex strands permits efficient reinforcement at low dosages. They are particularly suited to the modification of standard concrete mixes for floor screeds and slabs,and for the preparation of prebagged mixes of special mortars and renders.
(2) Water-dispersed Fiberglass Chopped Strands
AR Glassfiber Applied with water – dispersed size, the strands will disperse well to filaments in water in 10 seconds, and also disperse fast, usage amount less, enlarge strength.
It is typically used at a low level of addition to prevent cracking and improve the performance of ready mix concrete, floor screeds, renders or the special mortar mixes.it can be used for surface crack – proof of GRC products.
Applying for Fiberglass Reinforced Cement/Concrete
To prevent crack of GRC components
Good Integrity and no static electricity
Excellent integrated with cement
Good filament flexible and magnificent strands distribution cement
Endued good physical and chemical properties for GRC
--Mix your resin and hardener, or catalyst
--Next add your AR Fiberglass Chopped Strands
--It is best to use a paint mixer on your power drill to ensure that all of the strands are properly saturated Thick layers and large pour areas can create excessive heat, so proceed with caution.
Fiberglass Chopped Strand should placed under dryness condition and shall no be open the covering membrane until applying
Dry powder materials can build up static charges, Proper precautions must be taken in the presence of flammable liquids
Fiberglass Chopped Strand can cause eye irritation, harmful if inhaled, may cause skin irritation, harmful if swallowed.Avoid contact with eyes, and contact with skin, Wear goggles and face shield when handing. Always wear an approved respirator. Use only with adequate ventilation. Keep away from heat. Spark and flame. Store handle and use in a manner that minimizes dust generation
In case of contact with skin, wash with warm water and soap. For eyes immediately flush with water for 15 minutes. If irritation continues seek medical attention. If inhaled, move to a fresh air environment. If you have breathing difficulties seek immediate medical attention
Container may be hazardous when empty. Empty containers container product residue.