|Other Names:||Exterior Wall Paint|
|Place of Origin:||Fujian China|
|Main Raw Material:||Acrylic|
|Usage:||Building Coating,Exterior paint|
|Product Name:||best exterior paint|
|Keywords:||best exterior paint|
|Feature:||best exterior paint|
|Type:||Water-based Liquid Coating|
|Name:||Exterior latex paint|
|Appearance:||Milky White Liquid|
|Use:||Exterior wall waterproof coating|
|Selling Units:||Single item|
|Single package size:||18.84X6X14 cm|
|Single gross weight:||1 KG|
|Package Type:||Plastic bucket|
Exterior latex paint is a water-based, 100% acrylic resin emulsion paint. It is formulated for exterior surfaces such as brickwork, plaster, cement and is ideal for rendering. It provides at least 3-5 years protection against algae and fungus growth. It is also resistant to alkali, chalking, peeling and excessive color fading.
SKO excellent cheap washable water borne white acrylic paint
Remove dust, grease, mold algae and other adhesion substances on the painted surface, and keep the surface clean, dry and firm. The water content of the wall surface is less than 10%, and the pH value is less than 10. The old wall surface should use be removed the old film by a blade, and polished with sandpaper.
Base repair and leveling should be matched with high water-resistant strength putty products; When it is necessary to adjust the viscosity, use clean water and fully stir well. Strictly enforce the construction code, and should not construct when it is beyond the scope of the construction conditions. In the application of painting, pay attention to environmental protection, avoid contamination and pollution. When the painting is paused or finished, the tools and appliances should be cleaned in time to avoid consolidation and waste, and to avoid mixing the consolidated products into normal products. It should be stored in a dry storeroom at 5-35 ℃ and the storage period is 12 months.
Use soap and water.
Clean all equipment with clean water immediately after use and prevent unused
paint from freezing.
1.What kind of problems will face in paint application?
Paint applications are prone to the following questions:
Peeling Off: This is the use of low-grade putty, causing poor adhesion of paint peeling off the wall;
Bulbing: wall was not completely dry, water evaporating or within the walls of the film causing drumming;
Chalking: wall loose, excess water or when the temperature is below the application requirement;
Crack: wall (or substrate) cracking, is by the use of poor quality putty;
Fade: the wall was not full dry, and the wall was too alkaline, mainly caused by paint quality problem.
2.What are the advantages and disadvantages of using brush or roller?
Brush is the first and easiest method of painting, for painting objects of any shape, the disadvantage is inefficient, labor-intensive, general decorative properties. Roller in the other-hand is suitable for large-scale construction, high efficiency than brushing, but somewhat less decorative.
3.How to apply effectively by using a roller?
Brush dipped in paint no more than half of the brush hair, and if the brush roots stained paint, paint brush will be deformed, brush life will be shortened. Stained paint brush paint brush before the inner surface of the container must apply onto it, so as to remove excess paint dripping paint to the ground. Should start brushing paint brush vertically as far as possible, with the bristles brushing the abdomen, in the last rationalize paint brush over paint when received, will brush flatly, brush lightly with the tip of the bristles.
4.How to deal with old interior wall refurnishing?
Be sure to use the tool to eradicate the entire old, mutilated old paint surface. For complete old paint surface, use yarn polished smoothly. If it stick wallpaper and maintained a good surface condition, you can also be directly brushing paint. When brushing, to different climatic conditions and brushing tools, dilute with small amount of water.
5.How to paint new interior wall?
The new wall must be fully dried; the surface moisture should be less than 10%. You can use putty to the wall batch level. In order to make the film firmly smooth, color durable, require the use of water-based or oil seal wall paint primer.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q:Can you help me to OEM?
A:Definitely, We accept processing, OEM, other cooperation methods, and we hope to provide you, the help you need so as to seek development permanently together !