Before placing an order, you can check the parameter list, combine with the field situation, and after communicating with our sales staff, determine the instrument selection and finally rest assured to buy
DN400 Carbon Steel Remote Type water sewage RS485 inductive magnetic Flow meter
This technology of Magnetic Flow Meter has a number of advantages when it comes to liquid flow measurement. The sensors are generally inserted in line into the pipes’ diameter, and are therefore designed such that they do not disturb or restrict the flow of the medium under measurement. As the sensors are not directly immersed in the liquid—there are no moving parts—there are no wear and tear concerns.
The method of Magnetic Flow Meter measures the volume flow, which means the measurement is insensitive to changes in effects such as fluid density, temperature, pressure, and viscosity. Once the electromagnetic water flow sensor measurement transmitter meters is calibrated with water, it can be used to measure the other types of conductive fluid—with no additional correction. This is a significant advantage that other types of flow meters don’t have.
1.it can measure all kinds of electronic conductivity liquid, such as corrosive liquid , mud and slurry ,water etc.
2.The result cannot be affected by temperature, pressure, viscosity and density.
3.Flow sensor and intelligent converter compact or separately composes a complete flowmeter.
1.No move assembly, no abrasion
2.Measuring range rate: 1:100
3.No flow enhance equipment
4.Suits for various of electronic conductivity liquid
5.No affect from temperature, viscosity, pressure and density
6.Anti-corrosion and Self diagnose
7.Measure both to and reverse flow
8.Huge display, easy operate
9.Long-term EEPROM to save data when lose power
10.Support MODBUS/HART communication protocol
11.Wide working volts range or battery supply
12.Display chinese , english or russian
13.It can be match with GPS
| Production Name|| Magnetic Flow Meter|
| Medium|| water;wastewater;Mud and varioue kinds of conductivity liquid|
| Diameter|| DN400|
| Accuracy|| +/-0.5%|
| Pressure|| 1Mpa|
| Flow range|| 250~4000m3/h|
| Requirement of pipeline|| Upstream ≥5DN;Downstream≤3DN|
| Electrode material|| Stainless steel 316L|
| Lining material|| PTFE;RUBBER|
| Connection|| Flange,DIN standard|
| Body material|| carbon steel|
| Power supply|| 220V|
| Explosion proof|| Customized |
| Protection|| IP68|
| Environment|| Environment:-20~60℃|
| Power|| <20W|
| Item|| The Electrode table|
| Material|| The Medium|
| SS316L|| For:Living water; wastewater;Corrovise water and Mud,etc;|
| Hastelloy B|| For:Non-oxidizing acids at concentrations less than 10%;NAOH Concentrations less than 50%|
| Hastelloy C|| For:Mixed Acid and Oxidizing salts|
| Titanium|| For: Salt and weak acid ;Not application:hydrochloric acid, nitric acid and other reducing acids|
| Tantalum|| For:hydrochloric acid(<40%);Sulfuric acid and Other oxidizing acids|
| Plantinum|| For:Almost all acid-base salt solution But not application for aqua regia, except ammonium salt|
|Tungsten carbide|| For:Pulp ;sewage ;slurry|
- Avoid the magnetic objects and equipment with stong electromagnetoc field;
- should installa the flow meter at ventilated location;
- Avoid the location wherer ambient temperature above 50℃ and relative humidity above 90%;
- The water flowmeter should be installaed at somewhere spacious;
- The cooling water flow meter should be installaed behind pump and the value should installa at downstream.
2.Installa the flow sensor
- Must to ensure the pipeline is fulled and without bubbles to keep the high accuracy;
- The flow direction shoudl keep with sign on the body of flowmeter;
- Ensure the double electrodes keep Horizontal;
- If the medium is mixed by liquid and solid,Pls installa it at vertical to extend the working life of lining;
- If the environment with shocked pls installa the bracket at both front and behind;
- If the medium is pollution liquid,should installa the flow meter at bypass pipe and don't interrupted when you on service;
3.Requirement of Straight pipe
- The straight of pipe at inlet must more than 10×DN,Suggest 15DN;at outlet,the straight pipe at least 5×DN;
- If at the upstearm of flowmeter,there are values,elbow,the straight must need 15×DN;
- Pls installa the shut-off value at both front and behind of flow meter;
- The installation location for you reference
- Our Company is Top 10 Manufacture on Alibaba;
- We have about 30 years of experience in Manufacture;
- Our products have been exported to more 100 coutries and area;
- ISO,SGS,CE and more ceterficates for you reference;
- Main products are micro flow meter,gas mass flow meter,magnetic flow meter,
- turbine flow meter and other liquid flow meter.
- We have more than 1500clients in all over the world.
We apply for QUALITY CERTIFICATES for every meter,this is Important reason that clients are happy to choose us !
How to Contact us
If you want to purchase a Magnetic Flow Meter sample and know more details you could contact us freely,we could solve your question in Mon to Sunday.we also have our factory,Welcome to visit our company and get further support.
Any time you could contact us:
Mob/whatapp/WeChat/Skype: +86 13381521778
Email : sales1(@)gninstruments.com sales11(@)gnflowmeter.com
Return and Refund
1) If you received the products that don not match the orders, you could return the products and we ship a new products to you.
2)If the products that you received with the serious quality problems,we will provide the replacement.
If you are satisfied with our products, Pls give us 5 Stars.
Your satisfaction and positive feedback is very important to us. Please leave positive feedback and 5 stars if you are satisfied with our items and services. If you have any problems with our items or services, please feel free to contact us first before you leave negative feedback. We will do our best to solve any problem and provide you with the best customer services.