|Payment Terms:||L/C,T/T,Western Union,MoneyGram|
|Supply Ability:||1000 Unit/Units per Month Circuit Board Cleaning Machines|
|Place of Origin:||China|
|Brand Name:||AG Sonic|
|Used:||Print Head Ultrasonic Cleaner|
|Application:||Print Head Cleaner|
|Packaging Detail:||carton packing|
How do I get the best Print Head Ultrasonic Cleaning?
There are many considerations important to ultrasonic cleaning. Optimising these variables will produce the best cleaning. The most important decisions to be made are choosing the proper cleaning solution, cleaning at the right temperature for the correct amount of time, and choosing the right size and type of ultrasonic cleaner.
Is a special solution required for cleaning?
Soils adhere to the parts... if they didn't, the soil would just fall off the parts! The purpose of the solution is to break the bonds between parts and their soils. Water alone has no cleaning properties. The primary purpose of the ultrasonic activity (cavitation) is to assist the solution in doing its job. An ultrasonic cleaning solution contains various ingredients designed to optimise the ultrasonic cleaning process. For example, increased cavitation levels result from reduced fluid surface tension. An ultrasonic solution will contain a good wetting agent or surfactant.
Print Head 10L Digital Print Head Ultrasonic Cleaner Specifications:
|Ultrasonic Frequency||40,000 Hz|
|Ultrasonic Power||200 W|
|Heating power||450W strong power, quick heating|
|Unit Size||325 x 265 x 280 mm ( L x W x H )|
|Tank Size||300 x 240 x 150 mm ( L x W x H )|
|Package Size||435 x 360 x 350 mm ( L x W x H )|
|Power Supply||AC 100 ~ 120V, 50 / 60Hz|
AC 220 ~ 240V, 50 / 60 Hz
AG SONIC technology limited, which engaged in ultrasonic cleaner field for more than 10 years. And the main products are ultrasonic cleaner with different capacity.
AGSONIC ultrasonic cleaners are all designed, manufactured and tested to the highest standards. This is further supported by the 2 year warranty we offer on our ultrasonic cleaning equipment.
AGSONIC can offer solutions to every cleaning requirement.
Ultrasonic Cleaners are used in various industries from Automotive to Electronics to Medical facilities for a number of applications.
Place your disassembled motor boat engine components in the cleaner’s mesh basket. Position them to avoid contact with each other.
Place the parts basket into the heated bath. Cleaning time will vary depending on the condition of the parts but you can start at 40 minutes. Use this time to handle other chores.
At the end of the cycle remove the basket and inspect the parts for cleanliness. If you are not happy replace them in the bath for another run. A caution: do not reach into an operating ultrasonic bath.
When parts are clean, rinse them in fresh water to remove the ultrasonic cleaning solution residue. Allow them to dry and lubricate or oil as needed before reassembly.