|Place of Origin:||Shanghai China|
|Delivery time:||Delivery 3-5 Working Days|
|Ion Balancing:||≤|±10V|(450mm to center)|
|Discharge time:||≤3s(H 450mm to center, 1000V ~100V descent)|
|Selling Units:||Single item|
|Single package size:||80X25X20 cm|
|Single gross weight:||3.5 KG|
|Package Type:||IN CARTONS FOR Anti-static Blowers AP-DC2452-60C Mini DC Ionizing Hot Air Blower|
Anti-static Blowers AP-DC2452-60C Mini DC Ionizing Hot Air Blower
AP-DC2452-60C overhead ionizing blower is one of the ionizing blower product series manufactured by Shanghai Anping Static Science&Technology Co.,Ltd.,
AP-DC2452-60C overhead ionizing air blower applies the DC current ion synchronous transmitting technology. High volume of positive and negative ion are generated by two independent transmitting electrode with direct current corona discharge and arrive the object surface where the static to be eliminated most equally. Eliminate static and control the remaining static under international standard.
AP-DC2452-60C is widely used in electronics,plastic,chemical,printing and optics industry etc.
≤3s(H 450mm to center, 1000V ~100V descent)
≤ ±10V(match ESD STM3.1-2000;IEC 61340-5-1 standard)
≤ 45db(150mm to blower)
≤0.01ppm (150mm to nozzle center)
0°C - 50°C
Dimension and weight
(1) Fit for remove static in large area.
(2) Multi-unit independent ion transmitting combination with stepless speed regulating.
(3) High speed of static eliminating and good circuit stability.
(4) Front and back cover net unloadable and easy for maintenance.
Warranty and After Sales Service
(1)AP-DC2452-60C ionizing air blowers are strictly inspected before ex-work and match all the related technical standard indicated in this manual.
(2)AP&T PROMISE:Repair or change any damaged parts caused by quality reasons free of charge within one year from the date of purchase after we confirm the quality issue.
(3)Above promise is not fit for the following situation:Alternation of the device, wrongly used, incorrect installation, abasement, negligence, accidental damage, wrong input voltage, unpacking and repacking by user itself or maintain by other unauthorized service department.
(4)AP&T is free from any related responsibility of using the product except the parts specified here above.
In order to guarantee the blower to work with good technical feature, user should clear the sediment on electrode sharp slightly with brush pen every 5-7 days under normal operation. (Must be done 10 minutes after power is switched off)