|Payment Terms:||T/T,Western Union|
|Supply Ability:||100000 Unit/Units per Week|
|Place of Origin:||Guangdong China|
|Plate Type:||Screen Printer|
|After-sales Service Provided:||Video technical support|
|Usage:||Desktop DIY 3d Printer|
|Voltage:||Input: 100-120VAC/200-240VAC ,50/60Hz Output:24V|
|Applicable Industries:||Manufacturing Plant,Home Use,Retail,Printing Shops,Hobbyists|
|Filament Type:||PLA/ABS/WOOD/TPU/Carbon fiber, etc|
|Filament Color:||Various colors for option|
|Software:||Yidimu, Cura, Repetier|
|Connection:||online or TF card offline|
1:Does the yidimu ydm-2225 has the dual extruders like the bibo 3d printer?
Q:This only has one nozzle and feed.
2:Seriously how difficult is the build?
Q:Is very easy to build. Take your time and check every piece for burrs & defects,
and make sure everything is perfectly square/flush/aligned/parallel/etc. when building.
The rewards are going to be more accurate output from the printer.
3:What is the max temp of nozzle and bed?
Q: Hello,The nozzle can go up to 275 degrees but not out of the box,
you will need to upgrade nozzles for this capability. bed will heat up to 100 degrees.
4:So, Im looking for a beginner printer to design models. Would anyone recommend?
Q: Not a terrible place to start but I would go with the Select Mini V2 instead.
5:What is the maximum dinensions of an object that can be printed? Circumfrence and height.
Q: it's roughly a 220*220*250 build volume.
6:what size fillament should i use?
Q: PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg or 2kg Spool, 1.75 mm, White.
7:where is the printer made?
Q:The printer's origin is China.
8:i am new to this what is the best software that i can get that is good for starters?
Q:YIDIMU is what comes with the printer and it’s really pretty good.
There are other slicers that are free but YIDIMU is pretty top of the list.
9:While printing, halfway I stopped the print and removed the filament to use a different color.
Now I can't get the filament to extrude.
You might have clogged the extruder nozzle intake, take the fan and heat sink off of extruder motor and check for a clog.