|Other Names:||Epoxy resin, encapsulant|
|Place of Origin:||Shanghai China (Mainland)|
|Classification:||Double Components Adhesives|
|Main Raw Material:||Epoxy|
|Usage:||Construction,Fiber & Garment,Footwear & Leather,Packing,Transportation,Woodworking,electronics|
|Product name:||Two part industrial resina metal epoxy resin steel|
|Mixture/mass ratio:||100: 20|
|Viscosity after mixing (mPa.s):||900~1300|
|Operation time after mixing (min):||30|
|Gel time:||25℃/5hrs or 80℃/25mins|
|Hardness, Shore D:||85|
|Selling Units:||Single item|
|Single package size:||10X10X5 cm|
|Single gross weight:||2 KG|
Two part industrial resina metal epoxy resin steel SE2212
SE2202A/B is solvent-type room temperature curing epoxy potting and encapsulating compound for electronics
For potting of flame retardant for small and medium-sized and closing of the circuit board , such as capacitor coating,
solid state relay potting, etc
1. Good toughness, high hardness
2. Excellent adhesion, anti-cracking resistance
3. Excellent electrical insulating properties, stability
4. Good waterproof, moisture resistance, very low water absorption
5. Good temperature resistance, resistance temperature of 150 ℃ in 1 hr short time
6. After curing flame retardant UL 94 V-0
Characteristics before hardening
Black ropy fluid
Proportion , g/cm3(25℃)
Viscosity after mixing, mPa.s (25℃)
Weight after mixing, g/cm2(25℃)
Operation time after mixing, mins(25℃)
Preliminary curing time hr,25℃
Characteristics after hardening
Hardness, Shore D
Water absorption 24h,25℃,%
Dielectric constant ,1.2MHz,25℃
Curing shrinkage rate,%
Flame resistance, UL 94
Temperature range , ℃
Volume resistance DC500V, Ω·cm
1. Stirring A component evenly before using it .
2. Weighed in a 5:1 ratio A, B two components, stir well stay with after vacuum deaeration to use within 60 minutes run out.
3. Good potting devices ,if necessary, continue to pumping vacuum, help to increase the electrical performance of the device.
4. Curing conditions: 25 ° C for 24hrs at room temperature ; or let stand for surface bubbles after heating 65 ℃ × 0.5hr
5. Note: adhesive start the reaction after adhesive preparation , accompanied by heat release. With the greater amount of glue, the greater the heat release, the shorter operating time, required in a shorter period of time you are finished using
6.The above tests are measured under 100 g with adhesive.
Package & Storage
|Material||Epoxy Potting Compounds|
|Color||Black thick liquid|
|Packaging||Part A : Black , 25kg/bucket ; |
Part B: Black, 5kg/pot
|shelf Life||12 months|
|Storage||Keep in cool and ventilative place Temperature≤25°C, humidity≤50%RH|
1.Q:Delivery time ?
A: Normally,delivery time of sample order is 7 to 10 days,
standard order is 15-20 days.
2.Q:How to get samples ?
A: Normally,Sepna offer our customer 1-2pcs or 50-100g free samples for quality testing.
3.Q:How to be Sepna’s distributor ?
A: As the growing of Sepna’s global business,we need to find more and more distributors and agents
worldwide.Sepna will provide the best solution and service for our partners.
For more information,pls contact our salesperson or call us:+86-400-882-1323
4.Q:Any OEM service ?
A: Yes. Sepna can offer the customer OEM label service,and will give the protection of the your right in your market.
5.Q:Do you have MOQ ?
A:Yes.Normally,MOQ is 2000pcs or 1000kgs.