|Place of Origin:||CHINA|
|Product Name:||one component Liquid Water tanks waterproofing|
|Shelf Life:||9 months|
|Selling Units:||Single item|
|Single package size:||31.5X20X31.5 cm|
|Single gross weight:||21.5 KG|
|Package Type:||1kg/5kg/20kg bucket|
OEM Moisture Cured Single Component Liquid Rubber Polyurethane Polymer Roof Building Polyurea Waterproof Elastomeric Coating
SEPNA PU110 is one component self lelveling polyurethane based coating that cures by reaction with atmospheric moisture to form a seamless but flexible waterproofing membrane.
1. polyurethane based eco-friendly coating
2. One component
4. High elastic
6. All items tested exceeds national standard GB/T19250-2003
1. Waterproofing for basement, kitchen, bathroom, underground tunnel, deep wells structure and normal home decoration
2. Leak-proofing and penetrating-proofing of reservoirs, water towers, swimming-pool, for Bath-pool, fountain pool, impounding reservoir, sewage cleaning pool and irrigation channel
3. Used for preventing of leaking, corrosion and penetrating for water tanks, underground Pipeline
4. Bonding and moisture-proofing of various floor tiles, marble, asbestos board and so on
Technical Data Table
(color can be adjusted according to large amount)
Surface dry time
Strength at break
Elongation at break
3 ~ 5
Direction of Use
Tools preparation: clean tools including saw toothed plastic scraper, brush ,plastic drum, 30kg electronic scale,rubber gloves and shovel knife.
Application environment requirement: sealant should be installed in the cleaning condition at 5~35°C relative humidity 35~85%RH.
Cleaning substrates surface:substrate should be solid without loose materials; dry without construction on the wet substrates; clean without dust ,oil,asphalt,tar,paint,wax,rust,Non-Permeable agent,curing agent,release agent and film etc. It should be cleaned by wiping out,cutting,polishing,
sweeping,washing,scrubbing and blowing.
If large cracks on the substrate surface,the cracks should be filled by sealant ,and filled surface should be scraped as the same level as coating. After surface curing depth reach up to more than 3mm, the coating can be appiled on the joints.
The first coating application: first ,brush the wall corner and pipe joints partly ,then using saw toothed plastic scraper to knife-coating in large area. It should require homogeneous without too thick, the thickness of layer should be 0.5mm in general(If too thick, coating layer is easy to emerge bubbles ).
The second coating application: after the fully curing of the first coating layer (about 12 hours),
then knife-coating homogeneously at the second time. The good thickness of the second coating is 0.7mm.The direction of knife-coating should be vertical with the first direction of knife-coating. Please refer to the first coating application in details.
The third coating application: after the fully curing of the second coating layer,then knife-coating homogeneously at the third time.The direction of knife-coating should be vertical with the second direction of knife-coating. Special instruction: the the times of knife-coating should be confirmed based on thickness design of coating, the total coating thickness is 2.0-2.2mm.
Protective layer construction: if needed, protective layer can be applied on the surface of coating layer.
Cleaning tools: dip the tools in methylbenzene or dimethylbenzene(prohibit it strictly to dip in ethyl alcohol solvent), the tools can be used after cleaning the solvent. If long time not be used , it should be washed by alcohol or other organic solvent. The cured sealant should be scraped and teared off.
Coat film thickness is 1.00mm, usage is 1.3kg per square meter
Packing: 5kg/ metal bucket, 20kg/metal bucket
Q: May I know your company?
A: Sure! Suzhou Sepna is only one China manufacturer supplying self leveling polyurethane joint sealant.We mainly focus on researching of one component polyurethane joint sealant and one component polyurethane coating for large construction projects.
Q: What's your delivery time?
A: Normally, the delivery time of sample order is 3-7days
Bulk order is 10 days after received the PO and deposit
Q: Can I get samples?
A: YES! 1000g tin free sample supplied for your quality check.
Three ways to get free samples below
1. Supply us your import express account DHL/Fedex for sample shipping
2. You can inform your DHL/Fedex to pick up the sample from Sepna factory.
3. Pay express fee to Sepna company by Paypal or TT, we will arrange the sample delivery on our side.
Q: What is your MOQ?
A: Our MOQ is 1000kg for black color , 5000kg for grey color, 10000kg for customized color
Q: Can you do OEM lable for the products?
A: YES, the OEM service such as buyer labels are accepted as long as your order reach our standard amount.
Any more questions, please contact us anytime!