Theoretical paint consumption (calculated as dry film 30μm)
13-16 square meters / liter / single pass
The actual coating area varies depending on the surface roughness and dryness of the substrate, the construction method, and the dilution ratio.
Stir well before use and optimize filtration. In order to achieve the best coating effect, it can be diluted with no more than 30% (by volume) of water according to the actual situation.
Roll coating, brushing, airless spraying
Drying time (calculated at 25 ° C)
Dry surface: 60 minutes
Hard dry: 120 minutes
Recoating: at least 2 hours apart, wet weather or low temperature, should be extended
Please do not work in wet or cold weather (temperature below 5 °C, relative humidity is greater than 85%), otherwise the expected coating effect will not be achieved.
7 days / 25 ° C; wet weather or temperature is too low, should be extended to obtain the desired film effect.
After painting and stopping in the middle of painting, please clean all utensils with water in time.
Store in a cool, dry and ventilated place, strictly prevent frost (not less than 0 ° C), and the remaining paint should be sealed and stored.
Environmental protection matters (this product does not contain lead or mercury, is a green product):
The VOC content meets the national standards and the technical requirements of China's environmental labeling products.
The effective storage period is 18 months. Please refer to the label for the date of manufacture.