PU 8611 auto glass windshield pu sealant polyurethane better than silicon sealant
PU8611 is one component polyurethane adhesive with very good tensile strength and elasticity, primerless.
1.Bond very well with surface of variety material such as all kinds of metal, lumber, glass, polyurethane, epoxy, resin, and coating material, etc. Good cohesive force and durable elastic sealing performance 2.One component adhesive with fabulous thixotropy, it's convenient to apply with rapid curing speed 3.Excellent water, weather and aging resistance 4.Excellent wear-resisting property, high tear strength 5.Paintable and polishable 6.No sag or flow phenomena within 30mm perpends 7.Primerless
Technical Data Table
Main raw material
Tack free time
Elongation at break
1.Specially used for windshield and side glass of bus, car, railway vehicle (metro, high-speed rail), ship, spaceflight, engineering machinery vehicle, carriage and special vehicle 2.For glass steel and plastic accessories (car roof, side body and car front) 3.For bonding different material (such as metal, plastic, and glass) which requires high tensile strength and elasticity, the bonding can bear high mechanical deformation force
Directions for Use
Tool: Manual or pneumatic plunger caulking gun
l Cleaning: Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating.
l For cartridge Cut nozzle to give the required angle and bead size Pierce the membrane at the top of the cartridge and screw on the nozzle Place the cartridge in an applicator gun and squeeze the trigger with equal strength
l For sausage Clip the end of the sausage and place in barrel gun Screw end cap and nozzle on to barrel gun Using the trigger extrude the sealant with equal strength
l Attention of operation
Wear suitable protective clothing, gloves and eye/face Protection. After contact with skin, wash immediately with plenty of water and soap. In case of accident or if you feel unwell, seek medical advice immediately.
1.Obtain a new windshield. 2.Remove the plastic surround side and top mouldings correctly. 3.Cut the urethane from the outside between the glass and the pinchweld. 4.Apply a windshield primer to the frit band. 5.Apply the urethane with an electric caulking gun. 6.Lift the windshield into place. 7.Push the window down around the frame to guarantee a tight bond. 8.Allow the urethane to dry
Package & Storage
Product Mode: PU8611 Material: Polyurethane auto glass adhesive sealant Color: Black Paste Packaging: 310ml cartridge, 20pcs/carton ,
400ml/600ml sausage, 20pcs/carton, 240kg/ drum
SEPNA is a professional adhesive factory and the best adhesive solution supplier.
Since the company's founding, Sanna Chemical has been focusing on the automotive adhesives industry, and in 2005 acquired the Swiss PUNADE technology. After nearly 16 years of development, through the continuous innovation, Sepna Chemical has become a mature supplier.