|Supply Ability:||100 Set/Sets per Year|
|Place of Origin:||Shandong China|
|After-sales Service Provided:||Field installation, commissioning and training|
|After-sales Service Provided:||No overseas service provided|
|Conveyor belt:||Width 600|
|Packaging Detail:||Wrap film The wooden case|
1. Made of stainless steel.
2. High degree of automation, continuous work, automatic temperature control,
3. Adjust the frying speed and time intelligently.
4. Safe and convenient operation, stable and reliable performance, and long service life of equipment.
5. Good frying effect, pure taste and delicious taste.
6. Advanced mechanical configuration and control can always maintain a good working state, not only improve the output but also stabilize product quality, color, aroma and taste
7. The automatic filtration of the machine can greatly extend the service life of frying oil without frequent oil changes. The oil consumed in the process of frying is equal to the oil absorbed by the product.
8. Advanced and efficient heating system avoids energy waste to a greater extent and saves a large amount of energy expenditure
9. The realization of continuous working of the machine has improved the work efficiency of the unit and effectively reduced the unit cost, which is also very helpful to labor expenditure and management expenditure.
Description of main components
l frying machine is divided into three layers of the conveyor belt, the upper press for floating conveyor belt, intermediate for Fried conveyor belt, the lower for scraping the slag mesh belt.The top of the equipment is equipped with smoke hood.
l frying machine before use, please confirm, three phase four wire, cable not less than 120 square total power of 245 kw.There must be a reliable grounding line.
l thermocouple, thermocouple frying machine can automatically control the oil temperature, the device is equipped with three thermocouples inside the tank, to ensure the oil temperature equilibrium, such as high oil temperature heating tube will automatically stop working, and lower than the specified temperature, heating tube heating automatically.
l frying machine equipped with a circulation pump, can be a whole tank temperature equilibrium.
l come on don't finish a plus, step by step go to 20 cm from the edge
After l equipment downtime, such as the oil temperature has dropped below 50 degrees can open the pump pipeline valve is opened until the tank of oil residue, (before open pipeline valve, close the oil return pipe valve)
l oil tank: the storage of oil only can be used for frying machine, can't and don't device to connect
l liquid crystal display panels, need the temperature and time of the product, and design blast design called after successful formula.
Check whether the valves of the deep-frying machine are closed, open the power supply (confirm that the mesh strip is down to the working state), open the heating (oil must be in the oil tank), open the fan, oil temperature rise to the designated temperature, open the slag scraping, open the main mesh belt, open the circulating pump
Close to close the mesh belt, heating circulation pump - until exports do not close to outside to close shave slag, slag fan - until the oil temperature display 50 degrees - close the oil return pipe valve to open the oil pump oil pump pipeline valve is opened, until the rise of oil residue in the tank can main hood, mesh belt, belt clean cut off power supply