Characteristics of vibrating motor light decoration machine:1, the use of the world's advanced spiral rolling flow, three times vibration principle, so that the parts and grinding tools grinding each other. 2, suitable for large quantities of medium and small size parts finishing processing, improve the efficiency of 6-10 times. 3, the processing process does not destroy the original size and shape of parts. 4, can achieve automation, unmanned operations, easy to operate, in the process of work, can at any time spot check the processing of parts.
Vibrating finishing machine:In the working tank of the vibratory lighting machine: the workpiece, abrasive, water and chemical auxiliaries are driven by the vibratory driving system to produce motion.This results in continuous relative motion between the abrasive and the workpiece.The interactions between water, chemical auxillaries, abrasives, and vibratory finishing machines achieve the required surface treatment.With the sorting screen device, it is convenient to realize the sorting, easy to operate and reduce the working intensity.Especially suitable for chamfering of various metal and non-metallic parts (such as bearing rollers, rings, retainers, auto parts and gears, etc.), deburring and improving surface roughness.To improve the overall appearance quality of parts, is the first choice of aircraft manufacturing, automotive, bearing, textile, crafts and other industries essential equipment. Can be equipped with PLC programming control system;Fully automatic control.
Characteristics of vibrating type light decoration machine:Large output, high efficiency, energy saving, long life, low noise, no pollution, high quality. 1. Make use of the vibration deviation generated by the inertia exciter (vibration motor eccentric block) to make the machine move in the three-dimensional surface, thus making the workpiece and abrasive run in the same direction and rub against each other to achieve the effect of surface treatment. 2, suitable for large quantities of medium, small, size parts of light finishing processing, processing effect is good, consumption time is short. 3, the processing process does not destroy the original size, shape of the parts, suitable for the various shape of the workpiece finishing processing. 4, easy to operate, in the process of work can be at any time to check the processing effect of parts, another can be equipped with PLC control box, can achieve automatic control. 5. The container liner is made of PU material (polyurethane);The direct contact between the workpiece and the metal is prevented, and the service life of the machine is greatly prolonged. 6. Discharging device and other screening equipment provided;The grinding block can be separated from the workpiece, the workpiece automatically discharge.