No more than two (2) pits, inclusions, contaminants, voids or bubbles at a maximum diameter of 1.5 mm allowed on a 1220mm X 2440mm sheet.
* All sheets are to be covered with protective masking.
No more than two (2) scratches, scuffs, streaks, irregularity, or texture flaws at a maximum length of 3 mm allowed on a 1220mm X 2440mm sheet. Surface damage will be evidenced by damages in protective masking.
* Top material surface is to be planed and smooth with no evidence of machine lines.
* Bottom material surface is permitted to be course with machine patterns.
Bubbles or white spots:
Must be limited to 50mm in diameter to any single area on a sheet
Only two (2) bubble or white spot areas are permitted per sheet.
No single color within a shipped order may contain more than 10% of sheets with bubbles or white spots – even if the above specifications per sheet are maintained.
* Flatness: No more than 3 mm of bowing from the center of the panel to any exterior edge.
* Chips/Cracks: No chips or cracks on the corners or edges of the panel are tolerable.
Our color options are available as many as you can imagine.