Input voltage: 12v, rf operation mode :super isomerism
Receptor sensitivity :> 97 DBM
Transmission distance :> 100m (open space)
Decoding mode :MCU software decoding
Remote storage :20
Remote type support :EV1527 learning code
Operation mode: instant, lever, delay time (5 seconds, 10 seconds, 15 seconds)
Output terminal: no, NC, COM
PCB size: 35x30x18mm (length, width, height)
Remote control battery :2 button battery 3v CR2016
Note: maximum input power is 250 volts
- code cleanup:
Press the learn button on the receiver eight times and the code restarts.
After cleaning the code, the remote control needs to be recalibrated.
- Momentaneo way
Please contact us for detailed instructions.
- learning code :(press remote button to open it, then press close it).
Press the study button twice on the receiver. Wait a minute, the LED will turn off and enter the study state.
- press the learning button on the receptor 3 times and the LED will blink 3 times.
When the LED is on, press the remote control button (you want me to learn), press the remote control button A, and the LED flash will be on 3 times.
Press remote control B, Led flash 3 times.
After three seconds, the LED will turn off and learn how to succeed.