|Supply Ability:||200 Ton/Tons per Month|
|Other Names:||Powder Paint|
|Place of Origin:||Jiangsu China|
|Main Raw Material:||Resin, Pigment, Curing Agents and Additives|
|Usage:||Appliance Paint,Car Paint,Furniture Paint,Aluminum Profile Paint|
|Model Number:||outdoor powder coating|
|Product Name:||Powder Coating|
|Texture:||Smooth, Wrinkle,Cotton, Etc|
|Package:||20kg/Carton, 50 Cartons/Pallet|
|Gloss:||High Gloss, Matt, Low Gloss|
|Use:||Indoor and Outdoor|
|Packaging Detail:||Inside : double polyethylene bag Outside: standard export carton Net weight: 20KG Gross weight: 20.8KG 50 Cartons per pallet|
Powder coatings are mixed with a certain proportion of the resin, fillers, curing agents and other additives, then prepared by hot extrusion ,crushed and sieved.The products are stable at room temperature storage, then baking heat melted and solidified to form a smooth and bright permanent coating to achieve the purpose of decoration and corrosion.
1).The products are non-toxic, solvent-free and non-toxic volatile substances,there are no intoxication, no fire, no "three wastes" emissions and other pollution problems, in full compliance with national environmental laws.
2). Raw material utilization is high, the highest utilization rate even more than 99%.
3). After being pre-coated handle, disposable construction, without primer,you can get a sufficient thickness of the coating, easy to automate operation, high production efficiency, reduce costs.
4). Dense coating adhesion, good impact strength and toughness, high coverage corners, with excellent resistance to chemical corrosion and electrical insulation properties.
5).Powder coatings storage and transport are safety and convenience.
The products include high light ( above 86%),glazed (76%-85%),matte(20%-50%),low light (below 20%). We also offer a variety of shiny products according to the needs of users.
4.Powder physical properties:
Proportion : 1.2-1.8 (depending on the color and gloss ) .
Particle size distribution: 100% less than 125 microns (more than 85% between 60 to 90).
Curing conditions:200°C,10 minutes.
8-10m³/kg, the membrane is 60μm(calculate by 100% utilization rate of powder coating).
Carton packaging, lined with double polyethylene bag, net weight 20 kg.
Store below 30 °C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited.Under this condition, the powder can be stable for 12 months, more than the storage period may be re-examined, such as the results meet the requirements, can still be used.
8.Health and safety:
This product is non-toxic.
In the course of inhalation of dust should be avoided. The operators should wear appropriate dust mask and glasses.
Glazed/ Matte /Low light
The adhesion (grid method)
Salt spray test
Damp heat test
Good gloss retention, E≤0.3-0.4
Florida weathering exposure
South 45 °,12mons
Artificial accelerated aging
60°C/8hours + 50°C/4hours condensing,cycle for 500 hours
Gloss retention≥50% Color stability:E≤0.35
1.The above experiment uses 0.8mm steel with degreasing and rusting, and the coating thickness are 50-70 microns.
2.The above coating performance may be lower as shiny and slightly lower.
10.Why choose our products?
1). We have our own factory. The good quality and the competitive is the advantage of our company.
2). The material we choose is always good and products always come out with high quality.
3). A trial order or sample orders are welcomed.
4). Our products are exported to Europe, America, Southeast Asia, and other countries and regions in the world.
5). We will do our best to service you all the time if you have the further question.
Yangzhou Senyida Coating Equipment Manufacturing Co.,Ltd.
Established in 1990, Yangzhou Senyida Coating Equipment Manufacturing Co., Ltd. is a manufacturer specialized in the research development and production of powder coating equipment and powder coating. We are located in Yangzhou, Jiangsu, China, with convenient transportation access. We are close to Yangzhou Taizhou Airport and Nanjing Lukou Interational Airport.
Our company mainly produce and manage thermosetting powder coating (including epoxy polyester, pure polyester and so on ). We can offer all the models of RAL colors and Pantone colors. In addition, another important product of our company is the coating machines.
All of our products comply with international quality standards. As a result of our high quality products and outstanding customer service, we have established the relationships with many well-known enterprises in the domestic. We have also gained a global sales network reaching Sri Lanka,Uzbekistan, India and so on.
If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us and welcome to guide. We are looking forward to forming successful business relationships with new clients around the world in the future.
We have professional equipment and engineers to test the powder coating. To ensure that high quality products are delivered to customers.
Q1.Are you factory or trading company?
A1:We are a factory.
Q2.How long have you been in the powder coating industry?
A2:We have specialized in powder coating for about 30 years.
Q3.Where is your company?
A3:We are located in No. 36 Huayang Industry Park Xiaoji Town,Jiangdu Dist,Yangzhou,Jiangsu,China.
Q4.Can I get a sample before the PO?
A4:We can offer you the sample for free within 5KG.
Q5.How about the delivery time?
A5:Most areas are about 20 days.