|Payment Terms:||L/C,T/T,Western Union|
|Supply Ability:||5000 Unit/Units per Month|
|Optional Interfaces:||E1/PRI, GSM, PTT Radio, Audio, E&M, Magnet, etc|
|Place of Origin:||Guangdong China|
|VoIP Gateway:||VoIP FXS Gateway with 32 to 192 ports FXS FXO VoIP Gateway|
|IP Users:||Up to 500 SIP subscribers|
|VoIP Codec:||G.711, G.729, G.726, G.723, etc|
|Ports:||32 to 192 ports FXO/FXS|
|Model Number:||VoIP Gateway FXO FXS|
|Analog User Card:||16 ports FXO+FXS|
|VoIP Channels:||from 32 to 128 per unit|
|Port Type:||FXO (for CO line) and FXS (for Extension)|
|Work Mode:||Work as both gateway and IP PBX at same time|
|Slot for Analog User Card:||Up to 12 slots for analog user card|
|Packaging Detail:||Carton Box with Built-in EPE foam. one unit per carton. Model NC-MG320 Carton Measure: 56*50*15cm Carton G.W.: 6.5kgs. Model NC-MG640 Carton Measure: 60*39*18cm Carton G.W.: 8kgs. Model NC-MG930 Carton Measure: 60*39*27cm Carton G.W.: 11kgs.|
·VoIP protocol support: -SIP
RFC3326 (Reason header in SIP messages),
RFC3372 (SIGTRAN and SIP-T), RFC2327 (sdp),
RFC3398 (ISUP-SIP Mapping), RFC3261 (sip),
RFC5806 (Diversion Indication in SIP),
RFC2833 (DTMF), RFC3362 (t.38), RFC 3261(SIP 2.0),
RFC3204 (MIME media types for ISUP and QSIG Objects),
RFC3578 (Mapping of ISUP overlap to SIP).
·Codec:G.711 U-Law and A-Law, G.711 Appendix 1, G.723.1 and G.723.1 Annex A, G.729 Annex A and Annex B, G.726,GSM,ARM, ILBC.
·Echo Cancellation: G.168 128 ms Network Echo Canceller.
·FAX: T30, T38 and pass through.
·Generic Voice Activity Detection (VAD), Generic Comfort Noise Generation (CNG), Calling control: Called/Calling party number translation; second stage dialing, Auto dialing with DTMF, Ring Back tone, DTMF, Caller ID, and Flexible input/output Gain Control.
·Network Protocol: IP, NAT, ICMP, ARP, HTTP, BOOTP, FTP, TFTP, DHCP, PPPOE, SNMP, Diff-Serv
Beside, E1 ports are optional for these devices. This means you can use E1 ports on these device if you need.
-SS7 (ITU-T Q.700 series), 24 bits/14 bits PC, ISUP/TUP;
-ISDN PRI (ITU-T Q.931, Q.921);
-V5.2 (ITU-T G.964, G.965); -
·With a new generation of processor, a separate high-end DSP processing chip and powerful hardware processing, ensure that the equipment at full load conditions remained stable and reliable;
·99.99% availability, support continuous long talk at least 48 hours;
·Support over-current protection function on POTS interfaces ;
·Support the protection of lightning, surges, power lines and other protective lap;
Excellent voice communication quality
·Voice Activity Detection (VAD), to effectively save bandwidth resources;
·Comfort Noise Generation (CNG), to provide the same experience as PSTN in calls;
·Adaptive dynamic buffer technology, to meet the application under bad network;
·G.168 128ms echo cancellation technology. This indicator is far higher than the same kind of PBX, eliminating the echo interference caused by long distance call;
·DTMF detection / generation technology, to effectively support the business of the fax, callback, second dial.
Plentiful business functions
·Modification between calling number and called number;
·As a terminal, support the register trunk function to other GK(Gatekeeper) or SIP Server.
·As a gateway, support the control from superior GK or SIP Server to complete the trunking calls;
·Support any switch among SIP, FXO, FXS;
·Support automatic routing function;
·Support high capacity of black and white lists;
·Simultaneously support the register of 4 SIP Server;
·Support output of CDR;
·Fax support T.30, T38 and pass through;
·Support reelection function;
·Support detection of calling number and display of call ID;
·Support generation of dial tone, ring back tone, etc.;
·Port supports gain and comfort adjustment of noise;
·Multi-router and multi-bureau management, group, cluster and exchange management, intelligent routing distribution and equal traffic sharing;
·Support function of dividing groups, for the incoming calls, the subscriber line can be set to line up or take turns to choose;
·Flexibly control the incoming and outgoing of lines, the lock of long-distance calls can be controlled by the phone;
·Complete call functions,it can provide several kinds of call functions and special call way by customer's request;
·The voice processing capacity support voice play with built-in computer operator;
·High processing capacity in conference;
·Monitor and handle real-time telephone traffic;
Simple and convenient management/maintenance
·The way of management on software: Local and remote WEB; Local and remote Telnet; Console port-Super terminal;
·On hardware, with rack design, they can be installed in the standard 19 inches rack, also can be separately installed in a small machinery room. Model NC-MG930 is rack-mountable 3.5U height, NC-MG640 is rack-mountable 2.5U height, NC-MG320 is rack-moutable 1U height, NC-MG900 is rack-moutable 1U height.
Which industy NICEUC's Analog Gateway/FXO/FXS VoIP Gateway will be used in:
·IPCC(IP Call center);
·FXO or SIP Trunking port for operators, traditional switch, IP soft switch, cloud PBX and for software of IPCC;
-Enterprise communication network.
We are trying to use following diagram to describe how and where NICEUC's FXO/FXS VoIP Gateway/Analog Gateway SIP /Voice Gateway will be used. Hopefully they are helpful for you to understand.
|Slot for PSU||N/A (Built-in)||N/A (Built-in)||1 to 2 (Redundancy)||N/A (Built-in)|
|Slot for MCU Card||1||1||1 to 2 (Redundancy)||2 (E1 Card)|
|Slot for Anlaog User Card||1||4||12||N/A|
|Analog FXO/FXS Port (CO Line/Extension)||0 to 32||0 to 64||0 to 192||N/A|
|VoIP IP Channels||32 or 64||32, 64 or 128||64 or 128||64, 128 or 256|
|E1/T1 PCM Port [Optional]||0 to 4||0 to 4||0 to 4||0 to 8|
|GSM/CDMA/3G WCDMA/4G [Optional]||0 to 8||0 to 32||0 to 96||N/A|
|SIP Subscribers [Optional]||30 to 500||30 to 500||30 to 500||30 to 1000|
|Ethernet Port||2 (10/100/1000M Base-T)|
|Console Port||1 (RS232 port)|
|SIP Compatibility||CISCO, Siemens, AVAYA, Huawei, ZTE, etc.|
|Input Voltage||DC -48V or AC 110-240V||AC 110-240V||DC -48V or AC 110-240V (Hot-standby)||DC -48V or AC 110-240V|
|Telephone Line Transmission Distance||10KM||10KM||10KM||N/A|
|Machine Size||480mm*325mm* 44mm (1U)||480mm*300mm*88mm (2U)||480mm*300mm*160mm (3.5U)||480mm*286mm*44mm (1U)|
|Work Environment||0℃~50℃, Less 80%|
Standard export carton packing.
3-20 days after confirming order,detail delivery date should be decided according to
production season and order quantity.
Be a Manufacturer for 18 Years-One of the first movers in VoIP products in China
We are a professional Manufacturer and national high-tech enterprise in VoIP products from 2000 year.
We can open our registeration number to every customer. Register No.:91440300723031804W, if you like, you can use this number to trace and check our company and history in Chinese goverment official system.
|Office||Nanshan, Shenzhen, China||456.02 Square Meters|
|Factory||Baoan, Shenzhen, China||2520.00 Square Meters|
Strong Independent R&D Capabilities
With strong independent R&D capabilities, we can make different kinds of development works according to customer's special requirements. Both OEM and ODM services are available.
Current Situation of R&D Department:
|R&D Engineers||Experience||Average Time For New Products Launched||R&D Devices|
|Over 30 Years||21-30 Years||11-20 Years||6-10 Years||2-5 Years||Less Than 2 Years|
|Office||9||0||5||4||0||0||0||3 months||Oscilloscope, Digital Transmission Analyzer, Vibration Tester, Eletric Parameter Test, etc.|
So Many Big Customers
So many big customers from all over the world have been buying our products because of stable and reliable quality.