|Supply Ability:||963 Set/Sets per Year more|
|After-sales Service Provided:||Field installation, commissioning and training|
|Place of Origin:||Shandong China|
|Certification:||Patent and ISO9001|
|Use:||Burnishing,Container / Bottle Cleaning,Deflashing,Descaling / Stripping,stone, marble, brick, tiles cleaning, roughing and texturing|
|Cleaning Process:||steel pill or other abrasives|
|Cleaning Type:||shot blasting|
|Material:||stone, marble, tiles, granite, pavers|
|Function:||Granite Shot Blasting Machine for paver industry|
|Application:||marbles, paves, tiles, granite, ceramic etc.|
|Final effect:||stone surface anti-skid, 3 dimension look|
|Optional:||PLC control system|
|Abrasive blasting capacity:||180kg/min|
|Stone feeding speed:||5-10m/min|
|Save labor cost:||only need 2-3 operator|
|Packaging Detail:||Granite Shot Blasting Machine for paver industry 1. wrapped by plastic, then into MDF wooden carton, so avoid rust during shipping. 2. Nude packing. 3. Customized packing|
Granite stone compressed asbestos-cement sheet shot blasting machine for paver industry.
Applied to what material
Marble,stone,slabs etcmarble,stone,slabs ect.
Improve anti-fatigue performance.Improve corrosion resistance
380V/50HZ or 220V/60HZ
Electrical control system.
Auto-detection,auto-alarm and auto-cutout.
Shot steel/shot grit/wire cut etc.
Engineers available to service machinery.
If you have any question or concerns,pls feel free to contact us.
1,What is the target market for this machine?
The Blaster is designed for customers who require a more sophisticated method than just manual cleaning in preparation for further processing or painting.
2,What type of abrasive media does it use?
The Blaster is designed to use round steel shot. The shot is recycled inside the system and gets smaller and smaller during the blasting process, until it is completely consumed. Approximately two tons are required for start-up, and approximately 20 pounds are consumed per blasting hour. Replenishment is easily done as needed.
3,What utilities are needed to run the Blaster?
The electrical system runs on three-phase input and a transformer will be provided for your supply voltage if required. Clean and dry compressed air supply is also needed.
4,What does it cost to operate?
The highly efficient turbines require much less power that competitor's shot blast machines. Including abrasive consumption, power consumption and maintenance, the total operating cost averages around $20 per hour in US. When comparing this to your current methods, keep in mind that the Blaster is at least 4 to 5 times as productive as manual cleaning and only one operator is required to load and run the machine while it is working. Labor costs are much lower, plus you will have a huge amount of extra capacity for cleaning.
5,Are there any special operator skills required for the Shot Blaster?
No, once the machine is installed and adjusted by our technician, running the machine consists of merely switching it on and setting the speed dial for the desired surface finish. Maintenance is simple too.