Pressure relief valve,Spunding Valve
CIP and product routing butterfly valves
CIP spray balls and nozzles to ensure full and effective cleaning of the entire unit
Mobile trolly with braked castors.
Oil Filled Pressure gauge
SunGood Hop Gun Benefits
»Simple and user-friendly HopGunfor dissolving hop pellets into finished beer
»Gentle solution of hop pellets for well standardized process
»Efficient extraction for defined dryhopping
»Shorter contact time of beer and hops with constant flavoring effects
»The HopGuncan be flexible integrated in an existing cellar
»Good separation of dissolved hop particles –no filtration problems
»Optimal infusion of finished beer with ethereal oils
»Higher yield and flavor stability compared to conventional methodsBrauKonHopGun–Benefits
What are the advantages of the Hop Gun?
The practical experience shows that the Hop Gun leads to higher consistency and guarantees a very intense contact from the beer with the hops. This resultsin a more economic dry hopping, what effects financial savings. Further more your beer reaches a brighter and more smooth hop body.
What is the recommended flow through the Hop Gun? Which pump should be used?
General flowrate should be between 50 –200 hl/h depending on the size. For circulation of the beer use a normal centrifugal cellar beer pump. Try to turn around the volume of the Hop Gun about 50 times/hour. If that’s getting to high, just take the flow down and adapt to your conditions.For best results turn around the tank volume approx. 2-4 times.
What is the recommended pressure on the Hop Gun while dry hopping process?
While filling the Hop Gun at the beginning of the process,the pressure should be a max. 0.1 bar less than in the CCT.
When the Hop Gun is totally filled up, just raise the pressure about 0.1-0.2 bar over the tank pressure to maintain the CO2 level and prevent foaming