$5.60
Min. Order : 1000 Kilograms

Two parts thermal conductive potting silicone for electronics

Note: Please be cautious and check with your supplier if this product is for virus protection purposes and if the coronavirus (COVID-19) will affect your order.
Trade Assurance
Built-in order protection service in alibaba.com
Product quality
On-time shipment
More on shipping and other trade services.

Quick Details

Other Names: Silicone Sealant
Usage: Construction,Fiber & Garment,Footwear & Leather,Packing,Transportation,Woodworking,Electronics,Optical device modules
Delivery time: 5-7 days
Place of Origin: Shanghai China
Similar products: Dow Corning CN-8760,Dow corning TC-4605
Hardness: 55 Shore A
Model Number: SI2230
Appearance: Black or white
CAS No.: 67763-03-05
Brand Name: SEPNA
Main Raw Material: Silicone
Type: Two Component
Advantage: Research and development
Samples: Free sample
OEM: Acceptable
EINECS No.: 231-545-4
Classification: Double Components Adhesives
Thermal conductivity: 0.8W/m.k
MF: mSiO2 nH2O
Mixing Ratio: 1:1
Selling Units: Single item
Single package size: 20X20X20 cm
Single gross weight: 22.0 KG
Shanghai Sepna Chemical Technology Co., Ltd.
Gold Supplier
CN
Manufacturer, Trading Company
≤6h
Response Time
100.0%
On-time delivery rate
US$ 10,000+
16
Transactions
Visit Store

1.jpg

Product Display

2.jpg

Two parts thermal conductive potting silicone for electronics SI2230

 

SI2230 is two-component silicone based thermal conductive potting encapsulant. It has a good fluidity after mixing, can vulcanize to deep layer in room temperature. The operation time can be adjusted according to the temperature. Used to potting protection of varied heat dissipation and temperature resistance components. Fully compliant with RoHS and SVHC REACH standard.

 

Usage

Used for encapsulation of various modules, automotive module, LED Power driver modules, Solar panel junction box, EV charging column module, Lithium battery pack, Capacitor banks, Magnetic induction coils, Power inverters, etc.

 

Similar products:

  • Dow Corning CN-8760

  • Dow Corning TC-4605

SI2230-V9SI2230-V3

 Features

1. Two component and Molding silicone rubber

2. Low speed on stiffness and shriking

3. Excellent electrical insulation on high temperature and good stability  

4. Good property on waterproofing and dampproofing

5. Excellent flame-retardancy UL 94 V-0

Data Table

PROPERTY

STANDARD/UNITS

VALUE of SI2230

----

----

PART A

PART B

Color

Visual inspection

white / black            viscous liquid

white            viscous liquid

Viscosity

25°C, cps

3500±500

3500±500

Density

25°C, g/cm3

1.55±0.05

1.55±0.05

Mixture ratio

Mass ratio

A:B=100:100

Viscosity of mixture

25°C, cps

3500±500

Operation time

25°C, min

60±10

Cure condition

RTV/HEAT

25°C/ 4 hour; 80°C/ 30min

Cured appearance

----

White/ Gray-black elastomer

Hardness

Shore A

55±5

Thermal conductivity

W/mK

0.80

Linear expansion coefficient

K-1, ppm

300

Dielectric strength

kV/mm, 25°C

20

Volume resistance

DC500V, ohm-cm

1.1×1015

Loss factor

1 MHz

0.009

Dielectric constant

1 MHz

3.00

Application temperature

°C

-60~200

 

Flame resistance

UL-94

V-0

silicone epoxy sampleelectronic solution-wm

 

Direction for use

1. Mixing uniformity in the packing before using, as there’s part of filler sedimentation happens during storage.

2. Mix Part A and Part B by 1:1 mass ratio, after evenly mixed, pouring directly into the components or modules as per requirements. It’s recommended to slowly pour along the walls of the implements, so as to reduce the bubbles happens.

3. Still the potted component to let out the bubbles. Can be cured by heat, about 30 minutes in 80°C. If cured under room temperature, about 4 hours.

 1). Vacuum defoaming can improve the performance of cured product.

 2). Seal the remaining products tightly after use.

 3). Low temperature will slow the curing speed, overheating will lead to curing speed too fast. Keep the constant temperature in workshop is recommended.

Package & Storage

 Product ModeSI2230
 MaterialSilicone
 ColorBlack or white
 PackagingPart A :10kg /pot
Part B: 10kg /pot
 shelf Life12 months
 StorageKeep in cool and ventilative place Temperature≤25°C, humidity≤50%RH

5.jpg

Cooperation Brand

7.jpg

Packing And Shipping

8.jpg

Service Process

9.jpg

FAQ

10.jpg

1.Q:Delivery time ?



A: Normally,delivery time of sample order is 7 to 10 days, 
standard order is 15-20 days.


2.Q:How to get samples ?



A: Normally,Sepna offer our customer 1-2pcs or 50-100g free samples for quality testing.


3.Q:How to be Sepna’s distributor ?



A: As the growing of Sepna’s global business,we need to find more and more distributors and agents 
worldwide.Sepna will provide the best solution and service for our partners.
For more information,pls contact our salesperson or call us:+86-400-882-1323


4.Q:Any OEM service ?


A: Yes. Sepna can offer the customer OEM label service,and will give the protection of the your right in your market.


5.Q:Do you have MOQ ?


A:Yes.Normally,MOQ is 2000pcs or 1000kgs.

-