|Supply Ability:||1000000 Ton/Tons per Year PU FOAM SEALANT|
|Other Names:||PU FOAM SEALANT|
|Place of Origin:||Shanghai China|
|Main Raw Material:||Polyurethane|
|Usage:||Construction,Fiber & Garment,Footwear & Leather,Packing,Transportation,Woodworking,cracks and holes;window and door frames|
|Cured foam temperature endurance(℃):||-40 to +100|
|Packaging Detail:||750ml/can 500ml 300ml/can 12pcs/ctn|
Sepna two part waterproofing gel/thermal conductive silicone grease/epoxy resin for printed circuit board
1. Insulation of water-pipe network, central heating
2. Sealing of all types of cracks and holes
3. Mounting of window and door frames
4. Soundproofing of partition walls, car and boat cabins etc.
Thermal conductivity mW/(m·K)
Close cells rate(%)
Water absorption(up to 24h)
≤1.5% (no epidermis)
Fire Class of the cured foam
Contains no CFC’s, no HCFC’s, Ozone friendly
Toxicity of cured foam
Cured foam temperature endurance(℃)
-40 to +100
+5 to +35
Economically insulates, fills, seals and bonds
Easy to use
Bonds to and seals most popular construction materials, wood, concrete, plaster, plumbing etc.
Excellent for interior and exterior applications
Durable airtight seal-stops air infiltration, drafts and energy loss
High insulating value-saves energy and money
PREPARATION FOR USE
Substrate must be clean, firm, free of loose particles and free of dust, grease and mold release agents.
Surfaces not to be foamed must be protected. Shake cans well before using.
1. Shake can well to make the foam ready for use
2. Clean the substrate and spray some water on it
3. Screw foam dispenser on tightly and turn can upside down
4. Vertical fills the gaps from the bottom upwards
5. Foam is tack-free (dry to the touch) in 8 minutes in temperatures between +18℃ and +25℃ (65℉ ~77℉). Higher temperatures will result in faster curing times
6. Remove fresh foam over spray with Sepuna Foam Cleaner or solvents such as acetone. Cured foam can only be removed mechanically.
Remark: For gun/professional foam, an additional foam gun dispenser is needed to spray (Needs to buy separately). In such case, you may also need to buy foam cleaner to clean the gun adapter after use.
Introduction of our company:
we are leading manufacturer of Polyurethane, Epoxy, Silicone adhesive sealant for automobile,Windscreen, windshield ,construction,wood floor electronic,LED , Structure ect. Our products have been exported to all over the world ,have been vendors of many Top 500 comapany and won high praise, at the same time we also have excellent Technical team and After service team. Both of ODM and OEM are welcomed.
How to contact me?
ADD:No.1129 Denghui Road Minhang District Shanghai China
F: 0086-21-6631 0906