|Supply Ability:||10 Unit/Units per Month|
|Place of Origin:||Anhui|
|After-sales Service Provided:||Free spare parts,Online support,Field installation, commissioning and training,Field maintenance and repair service,Video technical support|
|Applicable Industries:||Energy & Mining,Solid Waste Recycling|
|After-sales Service Provided:||Engineers available to service machinery overseas|
|Separation:||Non Ferrous Metal Material|
|Packaging Detail:||Wooden Box|
Eddy Current Separator for Solid Waste Sorting Introduction:
CHNMAG Eddy Current Separator separates nonferrous metals such as aluminum, die-cast metal, and copper from nonmetallic material.
Solid Waste Sorting Machine - Eddy Current Separator Features:
The Eddy Current separator separation results can be affected by the following factors
• magnetic rotor speed
• magnetic rotor angle setting
• belt speed
• strong and deep magnetic field
So we optimize our design accordingly
• magnetic rotor speed - 0-3000rpm rotation speed
• magnetic rotor angle setting - manually adjustable rotor position in drum shell
• belt speed - adjustable speed motor drive
• strong and deep magnetic field - high grade NdFeb magnet system with multiple poles in rotor
Material is fed onto the conveyor belt of the eddy current separator, which moves it across the magnetic rotor where separation occurs. The magnetic rotor is surrounded by (but not attached to) a wear shell which supports the conveyor belt. This allows the rotor to spin independently and at a much higher speed than the wear shell and belt. When a piece of nonferrous metal, such as aluminum, passes over the separator, the magnets inside the rotor rotate past the aluminum at high speed. This forms eddy currents in the aluminum which in turn create a magnetic field around the piece of aluminum. The polarity of that magnetic field is the same as the rotating magnet, causing the aluminum to be repelled away from the magnet. This repulsion makes the trajectory of the aluminum greater than that of the non-metallic, allowing the two material streams to be separated.
CHNMAG Overband Magnet, Magnetic Pulley, Magnetic Drum are recommended prior to the eddy current separator.
An eddy current separator is NOT designed to be a source of magnetic ferrous separation. Serious damage will occur if magnetic separators such as pulleys or drums are not used to remove the ferrous metal from the burden before it reaches the eddy current system. At least two stages of magnetic separation.
Capacity per 1000mm Feed width (Tonnes/hour)
1. Water Proof packing.
2. Wooden Box packing
3. Delivery by Sea container.
To provide perfect magnetic solution is why we manufacture.If you are looking for the magnetic separator and industry magnet, you have reached the right place.
QIJIN MAGNET CO.,LTD., a high-tech enterprise specialized in manufacturing high-end magnetic separators and magnets, covering an 4 AC area with modernized workshop, has successfully designed and built several magnetic separation lines in more than ten countries such as Mexico, Philippine, Indonesia, India etc. And we are always focusing on providing technical guidance to develop the best possible magnetic solution for our customers, thereby ensuring full client satisfaction.
CHNMAG magnetic separators are commonly applied in all sectors of raw materials recovery, beginning in the metal recycling industry, waste industry, refuse processing and mining industry, to select magnetic materials out of material stream or to purify material. All types of magnetic separator can be designed and manufactured in accordance with the specific requirements of customers.
Any question about our magnetic separator or magnets, please contact us without hesitation. We will supply you with qualified magnetic separators and comprehensive services.