10 100m 20km Single fiber optical audio & video media converter
10/100M 20KM PRODUCT INTRODUCTION
- In accordance with Ethernet standards IEEE802.3 10Base-T, IEEE802.3u 100Base-T and 100Base-FX
- Supported Ports: SC for optical fiber; RJ45 for twisted pair
- Auto-adaptation rate and full/half-duplex mode supported at twisted pair port
- Auto MDI/MDIX supported without need of cable selection
- Up to 6 LEDs for status indication of optical power port and UTP port
- External and built-in DC power supplies provided
- 128 K's data buffer RAM
- Support for low-delay time pure data transmission and full/half-duplex flow control.
- Built-in watch-dog timer to monitor any error in internal data exchange
10/100M 20KM PRODUCT DESCRIPTION
1.10/100m sfp optical media converter can convert Optical-Electric Ethernet signals between 10/100M UTP interface (TX) and 100M optical fiber interface (FX).
2. It could extend traditional 10/100M Fast Ethernet to the distance of 90km through single optical fiber link. It possesses stable performance and good quality by adopting latest IC from USA and Taiwan.
3.It must be used in couples,because the transmitted optical differs from the receive optical in wavelength. 6 Group LED indicated lights could fully monitor the working conditions of Converters.
4.It is easy for users to observe network operation.
10/100M 20KM TECHNICAL SPECIFICATION
- Operating standards: IEEE802.3u,10/100Base-TX and 100Base-FX;
- Data buffer: 128K.
- Connectors: UTP Connector: RJ-45, 10/100Mbps; Fiber Connector: SC, 100Mbps
- Cable UTP: Cat. 5 UTP cable (the max distance up to100m)
- Fiber ( Singlemode): 8.3/125, 8.7/125, 9/125, 10/125μm(the max distance up to 90km)
- Flow Control: Full Duplex: IEEE802.3x,Half Duplex: back pressure
- LED Power, FX SD, FX Link/Act, TX 100, TX FDX, TX Link/Act.
- Power Requirement: AC 110 ~ 240V to DC 5V; DC48V to DC 5V.
- Ambient Temperature: 0 ~ 50°C
- Storage Temperature: - 40 ~ 70 °C
- Humidity: 5 ~ 90%
- Dimensions: Internal power: 30×110×140mm
- External power: 26×70×93mm