Ready to Ship
Fast dispatch
In stock

Factory made Plastic Boxing Taekwondo Sports Double Dental protector

$0.52
600-4999 Pieces
$0.50
5000-9999 Pieces
$0.46
>=10000 Pieces
Min. Order
600 Pieces
Choose your specifications
Company Information

Zhuozhou Yihua Mould Factory

CN Manufacturer, Trading Company
Response Time
24h-48h
Response Rate:
73.3%
Transactions
US$ 1,000+
2 Years Paid Supplier Gold Supplier Onsite Check Trade Assurance
Learn More

Quick Details

Place of Origin: Hebei China
Brand Name: Yihua
Model Number: YT06A
Plastic Modling Type: Injection
Product name: Dental Unit Spare Part
Color: transparent
Usage: protact
Selling Units: Single item
Single package size: 6.7X6.5X3.6 cm
Single gross weight: 0.032 KG
Package Type: package size: 35*4*30cm package method: 200/case
Material:EVA
Use:dental protactor

 

IMG_0920_-1=2_20180716095534_IMG_0922_

Production Method

1. To practice wearing the dental tray: Put the tray on the upper gums and use the method of sucking to discharge the air between the tray and the gums so that the tray can cover the entire row of teeth.

(Twice repeatedly, this is an important process for making the tray. The lower tray is practiced in the same way)

2. Soften the tray: Pour 80°C water into the flat container. The water depth should be able to submerge the tray and the handle should be left outside the water. The tray should be immersed in water for 5~7 seconds and then removed.

(The tray is very soft at the moment, so the immersion time shouldn't be too long. When the tray is raised, it will stretch softly, and it will start to deform slightly.)

3. Make the tray: Put the tray up, carefully and quickly put the tray on the gums, and continue to do step 1 of the sucking method.

The finger presses against the interface between the tray and the teeth, making it thinner, while the tip of the tongue tightens against the tray and the inside of the teeth.

(Speed is fast, be careful not to bite hard. The tray is a bit hot, but it will not cause any harm)

4. Dressing the tray: Remove the tray after the finger is pressed for 10-15 seconds and rinse with water. Use scissors to cut excess material along the gum line imprinted on the tray

(the line between the teeth and the gums), and cut off the handle. (Cut the upper part of the gum line can make the gel only contact with the teeth to avoid stimulating the gums)

Making points:

1. Put it in water and soften it for 5~8 seconds. The water temperature is about 80 degrees. The production speed must be fast, see the tooth braces begin to soften and shrink immediately

  2. Generally do the lower teeth, put the mouth while making inhalation while using the tongue top, then inside and outside the hand pressure, so that it is made more closely together. Be careful not to bite with your teeth

3. After the mouthpiece is softened and shrunk, the mouthpiece does not need to be too long. It is not necessary to cover the back teeth. If it is too long, it will irritate the throat and cause excessive nausea and saliva.

 

Packaging details:

Packing or according to the customers’requirements. 10-20workingg days since payment recipt (based on actual quantity).

Tracking No. Will be sent to you after delivery. And you will det every important shipping status by e-mail.

yunshutu

 

Company introduction

Zhuozhou Yihua Mould Factory is located in the city of Zhuozhou, 50 kilometers south of Beijing. It is a state-of-the-art company that integrates product design, hand board production, mold manufacturing and large-scale production. Products related to oral care, health care equipment, household daily necessities and so on. It’s main products include: dental box, anti-snoring , dental braces, dental trays, mouthpieces, rubber bowls, mixing knives, applicator sticks, and disposable medical kits, etc., and has continuously improved the design of related products. Research and development. Since its establishment, the production capacity and technological level have been continuously improved. It has established long-term cooperative relationships with a number of companies and the products are exported to Europe, America, Japan, South Korea, and Southeast Asia. Sincerely welcome friends from all walks of life to come. 01

02

03

04

05

_06

07

08

 

 

 

 

 

 

1. Competitive and reasonable price.

2. Keep you updated on your order status.

3. Any inquiries will be replied within 24 hours.             

4. More than 15 years mould industry experience.

5. Professional design team with mature technology.