|Payment Terms:||L/C,D/A,D/P,T/T,Western Union,MoneyGram,junction box potting silicone sealant|
|Supply Ability:||20000 Ton/Tons per Year Two Component Silicone Sealant for Junction Box|
|Other Names:||Silicone Sealant|
|Place of Origin:||Zhejiang China|
|Classification:||Double Components Adhesives|
|Main Raw Material:||Silicone|
|Usage:||Potting Agent for Junction Box of Solar Module|
|Brand Name:||Double Head Eagle|
|Durometer, Shore A:||40|
|Elongation at beak(%):||70|
|Packaging Detail:||Two-component 6:1 Potting Agent Silicone Sealant for Junction Box/Inverter Packing Details: Part A:B=6:1(18kg:3kg 180kg:30kg etc)|
Two-component 6:1 Potting Agent Silicone Sealant
for Junction Box/Inverter
Two Component Neutral Alcohol Silicone Sealant for PV Module
Durometer, Shore A
Room Temperature Cure Time (25°C, 50% humidity)
Elongation at beak
Useful temperature range
-45 to 150
* Some data could be customized by users’ demands.
* General testing condition: 25°C, 50%humidity.
FEATURES & BENIFITS
Tailor made product for PV J-box potting
Thermal conductivity >0.5 watts/meter ºK
Flame resistance UL V-0 level
Excellent heat radiation and insulation
Good adhesion performance to J-box substrate
Compatible with frame sealant and adhesive sealant
Neutral alcohol silicone sealant,fast room temperature cure
Potting Agent is supplied in two parts that are mixed in a 6:1 ratio (base and catalyst) by weight. Both base and catalyst part are moisture sensitive. Please keep opened packaging away from moisture. Catalyst is especially very sensitive to moisture. Purging with dry N2 is suggested when reopening packaging.
STY-9012 Potting Agent can be dispensed manually or by using one of the available types of meter mix equipment. Typically, the components are readily mixed with static or dynamic mixers. Automated meter-mix equipment is normally used with high-volume processes. For low-volume applications, manual weighing and simple hand mixing may be appropriate.
Inaccurate proportioning or inadequate mixing may cause localized or widespread problems affecting the pottant properties or cure characteristics. If possible, the potential for air entrapment should be considered during design of the part and selection of a process to mix and dispense the pottant. Subjecting the pottant part to >28 inches Hg vacuum may be necessary to ensure a void-free, protective layer.
It is expected that some settling may occur in the base over time. Therefore, it is recommended that the base be mixed in a pail or drum roller before use and for automated line use, it is recommended that the base be applied from an agitated dispense tank.
It is recommended that the material be mixed, such as with a pail or drum roller upon receipt. The material should then be applied from an agitated dispensing tank.
WORKING TIME AND CURE
Working time (or pot life) is the time required for the initial mixed viscosity to double at room temperature (RT). For two-part, condensation cure products, such as STY-9012 Potting Agent, the cure reaction begins when the catalyst and base are mixed. As the cure progresses, viscosity increases until the material cures. STY-9012 Potting Agent will cure at room temperature, 50% relative humidity and the result is 72 hours.
Customers should review the latest Safety Data Sheet (SDS) and label for product safety information, safe handling instructions, personal protective equipment if necessary, emergency service contact information, and any special storage conditions required for safety. SDS are available upon request, from any DHE representative.
Plastic barrel (base): 18kg
Iron pail (catalyst): 3kg