PU Polyurethane footwear industry adhesive for shoe sole

$2.21 - $3.12
Min. Order
500 Kilograms
Company Information

Guangdong Maydos Building Materials Limited Company

CN Manufacturer
Response Time
Response Rate:
US$ 1,000+
5 Years Paid Supplier Gold Supplier Onsite Check Trade Assurance
Learn More

Quick Details

Port: Guangzhou/Shenzhen/Hongkong
Payment Terms: L/C,T/T,Western Union,MoneyGram,Cash
Supply Ability: 5000 Ton/Tons per Month
CAS No.: 51852-81-4
Other Names: PU Adhesive
MF: Mixture
Place of Origin: Guangdong China
Classification: Other Adhesives
Main Raw Material: Polyurethane
Usage: Footwear &amp; Leather
Brand Name: Maydos
Model Number: PA01
Type: Solvent based adhesive
Type: Polyurethane Base
Colour: Translucent Clear
Solvent: Ketone
Viscosity: 1800-2100 mPa.s
Solids cotent: 14%
Specific Gravity: 0.86 g/cm3
Cleaner: Maydos Solvent
Flammability: Highly flammable
Shelf-life: Up to 12 months
Packaging Detail: 18L/4L
Products Description

Product description

Maydos Spray Adhesive formulated with good-quality raw materials and

conforming to national compulsory standard-GB18583-2001 requirements of

restriction of harmful and hazardous substance, possesses such features as low VOC,

fresh smell, high solid content, good flexibility, easy application, strong adhesive

force, environment-friendly etc. And after hardening, it can be resistant to damp,

water, heat, acid, alkali and bumping, so it is widely used for bonding sponge, heat

insulated materials, fiber, wood and thin metal sheet.

Recommended use

It is suitable for bonding different materials such as sponge, heat-insulated materials,

fiber, wood and thin metal sheet.

Technical Data
light yellow viscous liquid
90±40 mPa. S/25°C
Solids Content
Shear Strength
30 minutes ≥ 0.6 mpa
48 hours ≥ 1.0 mpa
Specific Gravity
≤ 200 g/L
Initial bonding power
≥0.6 Mpa
Features and benefits

1.Environmental: benzene free, no hazardous materials and additives and low VOC.

2.Best bonding effect can be achieved even under temperature around 60°C.

3.Fast drying speed and long viscosity-keeping time.

4.Strong bonding strength and good initial bonding power; water-proof and ageing


5.Easy application. It is easy to apply the adhesive evenly on the bonding surface and

no adhesive legging occurs.

Directions for use

Surface preparation

Surface preparation: the grease, dust, moisture, rust on the bonding surface must be

cleaned off.

Make sure that the surface must be dry during rainy days, or it will cause non-stick


Recommended apply system
Apply the adhesive evenly on the two bonding surfaces with spray gun and the
consumption is 80 - 90 g/m2. Spray gun with an opening of 2.0-2.5 mm and 0.3-0.5
Mpa air pressure is recommended.
Thickness control
The adhesive should be applied evenly and not too thick to avoid the weakening of the
bonding strength. But for porous materials or materials with coarse surface, you can
apply more accordingly.
After application of the adhesive, enough time should be given to let the solvent
evaporate completely to avoid bubble or stickiness. The airing time is about 5-15
minutes/25C and varies from the temperature, humidity and adhesive film. The
bonding can be done after the surface is dry by touch. For porous materials, you can
bond directly after application of the adhesive.
The application should be done once and for all. Aim the two surfaces, bond together
and press. Don’t move the bonding surfaces back and forth, or the bonding effect will
be affected.
Seal it tightly and store it in a cool and well-ventilated place where the temperature
is between 5C -35C and the relative humidity is ≤80%. Don’t expose it under the
Volatile solvent contained. Do not swallow. Keep it far away from open fire because
of volatile solvent in it which is inflammable and out of reach of the children. The
room should be well-ventilated during application.
No. of Regulation On Transporting Dangerous Goods: 32196
Product packaging
Company Profile
Our Advantages

1.How can you prove that you are a paint manufacturer rather than a trading company?
    As the one of The Top 5 paint manufacturer in China.We have many years of experience  since 1996 in production and export,welcome to visit our factory at any time.


2.How about the price ?
   We can offer the best wholesale price which depend on the quantity of the order.

3.I need to make sure the quality and the color .
   Our pleasure!We can offer the liquid Free sample for you to test and color chart.

4.If the product is not ideal, what can we do?
   We have perfect after-sales service to help to complete the construction smoothly.
   Even if there are any unexpected things in your order, we will assist to solve them.

5.What's your MOQ (min order quantity),production period and delivery time? 
   Our MOQ is 200Kg. We accept mixed order and the production period and delivery time are 7-10 days.

6.I want to put my Logo on the packing .
   We can accept the OEM, waiting for your details requirement.


Mr.Frank Wen Phone:+8613923296933 Whatsapp:+8613923296933 WeChat:+8613923296933 Skype:w.frank86 QQ: 200612026