AR9580 openwrt 2.4G wifi adaptor PCIE module

$11.20 - $23.00
Min. Order
1 Piece
Company Information

Gainstrong Industry (Shenzhen) Co., Ltd.

CN Manufacturer, Trading Company
Response Time
Response Rate:
2 Years Paid Supplier Gold Supplier Onsite Check Trade Assurance
Learn More

Quick Details

Port: Shenzhen
Payment Terms: L/C,T/T,Western Union,Paypal
Supply Ability: 5000 Piece/Pieces per Day
Model Number: GS-PQB21
Brand Name: Oolite
Place of Origin: Guangdong China
Main chipset: AC9582
Modulation Techniques: 802.11 g (OFDM) : 64 QAM, 256 QAM, QPSK, BPSK
Standards: WiFi: EEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11a
Bus Interface: WiFi: Mini PCIE
OS supported: Linux
Frequency Range: 2.412 GHz ~ 2.484 GHz , 5.18 GHz ~ 5.825 GHz
Data Rate: 802.11b: 11, 5.5, 2, 1 Mbps
Channel frequency: 2412 ~ 2484 MHz
Mode: OFDM 54 Mbps
Freq err Limit: ±13PPM
Packaging Detail: PE or as your request customized
Product Description

The Qualcomm Atheros AR9582 is a highly integrated single-chip solution for 2.4 or 5 GHz 802.11n wireless local area networks (WLANs) that enables high-performance 2x2 MIMO with 2 Spatial Streams for wireless applications demanding the highest robust link quality and maximum
throughput and range. The AR9582 integrates a multi-protocol MAC, baseband processor, analogto- digital/digital-to-analog converters (ADC/DAC), 2x2 MIMO radio transceivers, and PCI Express interface in an all-CMOS device for low power consumption and small form-factor
applications.The AR9582 implements half-duplex OFDM, CCK, and DSSS baseband process, supporting up to 150 Mbps for 20 MHz and 300 Mbps for 40 MHz channel operations, and IEEE 802.11a/b/g data rates. Additional features include Maximal Likelihood (ML) decoding, Low-Density Parity Check (LDPC), Maximal Ratio Combining (MRC), Tx Beamforming (TxBF), Space Time Block Code (STBC), and On-Chip One-Time Programmable (OTP) memory. The AR9582 supports 802.11 wireless MAC protocol, 802.11i security, Rx/Tx filtering, error recovery, and 802.11e quality of service (QoS).

The AR9582 supports up to two simultaneous traffic streams integrating two Tx and two Rx chains for high throughput and extended coverage. Tx chains combine baseband in-phase (I) and quadrature (Q) signals, convert them to the desired frequency, and drive the RF signal to multiple
antennas. Rx chains use an integrated architecture. The frequency synthesizer supports 1-MHz steps to match frequencies defined by IEEE 802.11a/b/g/n specifications. The AR9582 supports frame data transfer to and from the host using a PCIE interface providing interrupt generation and reporting, power save, and status reporting. Other external interfaces include EEPROM.

Dynamic frequency selection (DFS) in required 5-GHz bands when used as an AP
2x2 MIMO technology improves effective throughput and range over existing
802.11a/b/g products
Supports spatial multiplexing, cyclic-delay diversity (CDD), low-density parity check (LDPC), maximal ratio combining (MRC), Space Time Block Code (STBC), and Tx Beamforming (TxBF)
Smart antenna diversity
Single-ended RF ports with integrated matching simplify board design and layout
Integrated 1.2 V switching regulator
Data rates of up to 150Mbps for 20 MHz channels and 300 Mbps for 40 MHz channels using reduced (short) guard interval
On-Chip One-Time Programmable memory
Support for IEEE 802.11e, h, and i standards
WEP, TKIP, AES, and WAPI hardware encryption
PCI Express 1.1 interface

20 and 40 MHz channelization
High Tx power accuracy at lower power level
8 bits spectral analysis resolution
Frame aggregation, block ACK

802.11e-compatible bursting
Support for 2/3/4/6-wire BT coexistence

Related Products

  Minibox LoRa gateway

               Minibox V3.2 wifi router

                    LoRa AI

Our Company

GainStrong Industry Co.,Ltd is was established in 2009. It is a professional R&D and manufacturer of wireless network communications. And also is a leader in IIoT industrial IOT technology and get the title of a national high-tech enterprise in China.ODM

Our company's products include smart wifi routers, wireless RF modules, GPS modules, IT equipment and so on.Those are widely used in domestic and foreign enterprises and industrial enterprises, home smart home wireless communications and other fields. The company's products have many independent intellectual property rights. Our company has wealth of experience in providing ODM R&D design and OEM manufacturing services to global customers.

Packing & Delivery

1.Can I take a sample before bulk order?
Yes, we can support you samples for function test first.

2. How long to make sample or mass production?
Usually we have sample in stock, processing time will be around 3~5days

3. Do you accept OEM / OEM?
GainStrong is engaged in providing professional ODM/OEM service of customized electronic
productions. Our R&Dteam members have rich hardware and software experience on
providing global customers with complete stable and cost-effective products.

4. Is there MOQ limit?
Welcome to place sample order to check the quality before bulk orders.
Any qty welcome,but as you know,different qty with different price.
Large qty means low cost.