BNT-6000Y Mini Laboratory Spray Dryer (Small Spray Dryer) The compact design of the unit allows it to be placed in a laboratory or in a specially designed stainless steel rack, all in one, with no additional equipment required. One-touch boot, color LCD touch screen operation, can be completely automatic or manual monitoring of two modes of operation, convenient operation and monitoring of the experimental process. Is currently the smallest, the smallest noise, the drying effect is very good a spray dryer.
Features of Laboratory Spray Dryer
1. Imported nozzle, high efficiency.
2. Color LCD touch screen parameter display: air inlet temperature / air outlet temperature / peristaltic pump speed / air volume / needle frequency.
3. Automatic control: one-touch power-on, set the spray process parameters, the temperature reaches the predetermined temperature, peristaltic pump start-up, the touch screen displays the animation, the operation flow is clearly displayed; shutdown simply press the stop button, the machine automatically shut down safely .
4. Manual Control: If you need to adjust the process parameters during the experiment, you can easily switch to the manual state, the whole process of dynamic display color touch screen (animation)
5. There is a nozzle cleaner (needle), the nozzle is blocked, it will automatically clear the needle frequency can be automatically adjusted.
6. Shutdown protection function: just press the stop key when shutdown, the machine stops running immediately except the blower to ensure that the equipment will not burn out due to misoperation (forcing the blower off).
7. Spray, drying and collecting system is made of transparent, high-quality borosilicate heat-resistant glass material, which allows the drying process to be carried out in a pollution-free environment.
8. Built-in imported oil-free air compressor, powder particle diameter was normal distribution, mobility is very good, the noise is very low, less than 60db.
9. Two-fluid spray atomization structure, the whole machine is made of high-quality stainless steel materials, compact design, no ancillary equipment.
10. Dry temperature control design using real-time control PID temperature control technology, so that the whole temperature control temperature accuracy, heating temperature control accuracy ± 1 ℃.
11. In order to maintain the purity of the sample, equipped with air inlet filter.
12. Feed rate can be adjusted by feed peristaltic pump, the minimum sample size up to 50ml.
13. After drying the finished powder, the particle size is more uniform, more than 95% of the dry powder in the same particle size range.
14. For sticky materials, there is a nozzle cleaner (through needle). When the nozzle is blocked, it will be automatically cleared. The frequency of the needle can be adjusted automatically.
15. Innovative tower wall purge, material recovery rate higher.
Production Parameters of Laboratory Spray Dryer
Into the air temperature control: 30 ℃ ~ 300 ℃
Air temperature control: 30 ℃ ~ 140 ℃
Evaporation of water: 200mL / H ~ 1500ml / h
Maximum feeding amount: up to 1500ml / h (adjustable)
Feeding method: peristaltic pump adjustment, feeding amount: 30-1500ml / h
Minimum feeding amount: 50mL
Temperature control accuracy: ± 1 ℃, the use of imported temperature control system
Average drying time: 1.0 ~ 1.5S
Dry air flux: the maximum air volume 0-330m3 / h maximum wind pressure 686Pa
Compressor: imported oil-free air compressor, good fluidity, and the noise is very low. 0.2KW, the maximum gas production 4.2m3 / h, working pressure 2-5bar
Jet (needle): variable frequency firing pin (built-in 2.3bar compressed air supply
Nozzle diameter: 0.5mm / 0.7mm / 0.75mm / 1.0mm / 1.5mm / 2.0mm optional, and can be customized on request
Shutdown protection function: just press the stop button when the machine is shut down, the machine stops running immediately except the blower to ensure that the equipment will not burn due to misoperation (forcing the blower off).
Machine power: 3.5KW / 220V
Dimension: 1250mm (height) × 650mm (length) × 500mm (width)