4L/Plastic barrel, 20L/plastic barrel, 200L/iron barrel ,or as requirements.
High Temperature Spray Lubricant And Penetrating Oil
high-temperature lubrication oil High Temperature Spray Lubricant High Temperature Spray Penetrating Oil
JY6406 is a special synthetic oil-based oil, add antioxidant, anti-wear, anti-rust additives prepared.
Excellent high temperature stability, long-term high temperature conditions still have fluidity; less coking and the formation of coke quality can be dissolved into the new oil, to extend the clean cycle; low volatility loss and cooling zone oil condensation, will not be caused by the oil film Damaged; good adhesion; long-term work under high temperature can still maintain good lubrication performance; good metal infiltration, easy to spread, to ensure adequate lubrication chain; excellent high temperature performance, wide temperature range.
Viscosity index ≥
Flash point(Opening),℃ ≥
Pour point,℃ ≤
Acid value,mgKOH/g ≤
Evaporation loss(250℃ x 1 h)% ≤
JY6406 is suitable for the lubrication of the chain of high-temperature equipment such as the stretching tenter, heat setting machine and high temperature drying room of textile industry in textile printing and dyeing and plastic industry, especially suitable for low-flow copper pipe and film lubrication of centralized lubrication system Tenter chain lubrication.
During use, the chain and the slide should always keep a thin film, to avoid over lubrication.
Packing & Delivery
Normally 20L/plastic drum or 1L/plastic box Also accept clients' requirements
By sea/air Small sample can be send by express
1.May i know your MOQ? How long it takes for production? Our MOQ is 10kg/item Normally we have in stock and can arrange delivery in 3 days.
2.How do you transport the goods? We transport the goods by container. Our factory possesses longterm cooperation with ship agency which can provide you lowest shipping fee. For samples we can send by express.
3.Can you satisfy my special requirement? Definitely! We are direct manufacturer and we have strong producing capacity and R&D capacity!
4.Which payment terms can you accept? Normally we can work on t/t term or L/C term, sometime DP term. On T/T term, 30% down payment is required in advance,and 70% balance shall be settled before shippment, or against the copy of original B/L for old client. On L/C term, a 100% irrevocable L/C without 'soft clauses"can be accepted , pls seek the advice from the individual sales manager whom you work with
5.How long will our price be valid? we are a friendly supplier, never greedy on windfall profit, basically, our price remains stable trough the year, we only adjust our price based on two situations: The rate of USD, RMB varies significantly according to the international currency exchange rates. Our raw material suppliers djusted the price, because of the increasing labor cost, and raw material cost.