cement base floor, concrete, epoxy, emery floor, terrazzo, etc
Place of Origin:
Single package size:
Single gross weight:
25kg/barrel + Wooden frame, in containers.
Cement Floor Densifying Agent
DELIGU two-component cement floor densifying agent is specially developed for the cement floor and applies to all kinds of cement floors hardening and densifying. Only one permanent treatment, it produces a densified, harder, penetration and abrasion resistant concrete surface. These two agents apply to various of manufacturer factories, logistic centers, warehouses, underground parking lots and supermarket floors schools, hospitals, villas etc.
DELIGU cement floor densifying agent Armor Floor No.1 is specially developed for the cement floor. The chemical active substances penetrating the cement surfaces reacts with calcium hydroxide to form calcium silicate hydrate C-S-H, which can increase the strength and hardness of the cement floor. The stable C-S-H fill into the pores of the cement floor surface so that increases the chemical corrosion, has the function of sealing and dustproofs.
1. High solid content, non-toxic, odorless, non-flammable, non-combustible and complying with VOC requirement
2. High quality that is produced by Wuhan Research Institute of Chemical Industry that have 55 years experience in research and development
3. National brand, insured by PICC insurance company
Packing & Delivery
Packaging Details Delivery Time
25kg/Barrel + Wooden frame, in containers 5~ 7 days, urgent order within 3 days
5-35 .C(41~95 .F)
2. New Floor
must be fully cured a minimum of 28 days before the application of these agents
3. Old Floor
clean and dry or polish with polisher after construction, then can use at any time
4. Construction method
Paint or brush
First dilute agent A at the ratio of agent A to solution water = 1: (6 to 8) and then apply it to the ground to maintain infiltration for 4 hours. During the process, drag the material manually or mechanically to help permeate. After the material is viscous, Dilute with a small amount of water, repeat these steps until the material is no longer absorbed, clean any remaining A agent. After the ground is dry, apply agent B , Soaking time is 4 hours. During this period, kept the ground moist. After finishing, polish and clean the ground.
first grind the surface and make it flat, clean and dry
keep moist for 4 hours after using diluted armor floor No.1 agent A
clean and dry
polish with polisher and clean
1. It is recommended that the ground floor with heavy ash and sand shall be first painted the armored floor No. 1-A dilution agent (A: water = 1 : (4~5)) and then grind again. 2. The ground must not be allowed to dry during the process of soaking the diluted armored floor No. 1 - A agent , Otherwise, the active ingredients in the A agent will affect the permeability of the material,if reaction with air. 3. Floor Dry grinding and wet grinding depend on the concrete grinding plate and the configuration of the concrete grinding equipment. For example, an industrial vacuum cleaner is required for dry grinding to solve the dust problem in grinding. 4. The level of floor polishing is related to the acceptance standard of the project. Floor surface brightness is determined by the number of polishing stages.
Liuan Valued Electric Applicance Underground Parking Lot
Project Area: 6000 square meters Materials: DELIGU Armor Floor No. 1- A and B agents Construction Company: DELIGU agent in Anhui province
Foshan Big Iron Digital Control Factory
Project Area: 10000 square meters Materials: DELIGU Armor Floor No. 1- A and B agents Construction Company: DELIGU agent in Guangdong province
Handan Midea Factory
Project Area: 5000 square meters Materials: DELIGU Armor Floor No. 1- A and B agents Construction Company: DELIGU agent in Hebei province