|Design Printing:||No printing|
|Place of Origin:||China|
|Adhesive Side:||Single Sided|
|Product name:||Tesa51608 Car Cloth Tape|
|Adhesive Type:||Hot Melt|
|Packaging Detail:||96rolls one carton or as your request .Original Tesa 51608 Car Cloth Tape Flannelette Public Wire Harness Engine Room Temperature Resistance Tape Tesa Adhesive Tape|
|Selling Units:||Single item|
|Single package size:||35X7X7 cm|
|Single gross weight:||0.05 KG|
Original Tesa 51608 Car Cloth Tape Flannelette Public Wire Harness Engine Room Temperature Resistance Tape Tesa Adhesive Tape
Precision Tape Slitting
Customized size and shape is available
Q. What percent of the final bond strength can I expect immediately after application? After 24 hours? After 72 hours?
A. Immediately after an application is made, about 60% of the bond strength is achieved. As the adhesive continues to wet-out the surface, you can expect the bond to be at about 75% - 80% after 24 hours. After 72 hours, 95%+ of the bond strength is achieved. The bond will continue to build with time.
Q. The part is not adhering to the vehicle. What might be wrong?
A. Areas to investigate for poor adhesion or performance include: Check for surface contamination. The substrates must be clean and free of any contaminant. This is the most common cause of poor adhesion.
(1) Check for surface match. Are the two surfaces to be bonded a good match?
(2) Check for proper application pressure and wet-out.
(3) Check the back of the component for flatness. 4.Check the installation process for proper procedures.