spray paint ptfe non stick coating

$5.82 - $8.85
Min. Order
1 Kilogram
Company Information

Anhui Sinograce Chemical Co., Ltd.

CN Trading Company
Response Time
Response Rate:
US$ 10,000+
2 Years Paid Supplier Gold Supplier Onsite Check Trade Assurance
Learn More

Quick Details

Port: Shanghai and other ports
Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram,Paypal
Supply Ability: 4800 Ton/Tons per Month spray paint ptfe non stick coating
Place of Origin: China
Brand Name: sinograce
Model Number: PF-600A5
CAS No.: No
Other Names: ptfe coating
MF: Water based non stick cookware coating
State: Liquid Coating
Main Raw Material: Water based PTFE polymer
Usage: Appliance Paint,Boat Paint,Building Coating,Furniture Paint,Paper Coating,Plastic Coating,Road Marking Paint,Rubber Coating,non stick cookware coating coating
Application Method: Spray
Product Name: Water based non stick cookware PTFE coating spray PF-600
Viscosity: 25±2
Type: ptfe coating
Solid content: 35±2
Color: Black
Cover area: 8-10
Sintering temperature (Base coating): 150-180
Sintering temperature (Top coating): 380-420
Sintering time (Base coating): 5-10
Sintering time (Top coating): 10-15
Packaging Detail: 200kg/drum or 25kg/drum for spray paint ptfe non stick coating

spray paint ptfe non stick coating

Product Description

 Water based non stick cookware PTFE coating spray PF-600


PF-600 is designed with two-layer coating system. Thanks to its high density, good inadhesion, easy-to-clean performance and strong practicability. It is applicable for substrates like aluminum, alloy and stainless steel etc.


Water based fluororesin

Key Features


lExcellent heat resistant

lExcellent chemical resistance and abrasive resistance

lExcellent and lasting non-stick performance, easy to clean

Typical Properties


Black liquid (Primer and top)

Solid content (%)


Viscosity (cp)

600~1000 Primer

400~800 Top

Density (g/ml)

1.20 Primer/1.30 Top


8-11(Primer and top)

Color of the film surface

Black with metallic

(Flat and smooth)

Curing temperature ()


Gloss (60° glossimeter)


Film thickness (μm)


Non-stick performance

Fry eggs at 170±10

>10 cycles

Corrosion resistance

Boling 10% salt water for 24 hours

No blister

Abrasion resistance 3KG/21cm2

>3000 cycles

Hardness (ZHONGHUA pencil)




lAluminum, die-cast aluminum, alloy and stainless steel

lFrying pan, stock pot, baking tray, electric fry pan and inner pot of electric cooker etc.

Storage and handling

lAvailable in 20 kg/ barrel or 30 kg/ barrel

lStore products in tightly closed original containers at 5-35

lShelf life: 6-9 months from delivery date

lAccording to non-dangerous goods transport

How to use

1.      Requirement on pre-treatment

lFirstly, apply high-temperature degreasing, then wash with 1%~3% NaOH solution (60) for more than 6 minutes, dry it after water rinsing;

lBlast with 80#~120# corundum to make the surface roughness reach 2.0μ~3.0μ, pay attention to sandblast evenly;

lWash with 1%~3% NaOH solution(60) for more than 6 minutes, rinse with water;

lWash with 1%~3% hydrochloric acid solution (60) for more than 6 minutes, rinse with water and dry.

2.      Preparation of the coating

lDispersion of coating: the coating must be fully dispersed before operation;

lViscosity adjustment: the viscosity could be adjusted according to different spray methods. Dilute with clean water if the viscosity is over high;

lCoating filtration: filtrate the coating with screen (100mesh) before using.

3.      Application

lThe spraying environment should be dry, well-ventilated, no smoking and fire. We suggest using dedicated spray gun, elevated tank and curing oven;

lThe air compressor should be degreased, dewatered and equipped with water oil separator before using;

lRoll the coating at 30rpm speed before using to make sure there is no sediment, and filter with 100 mesh screen;

lAdjust atomization and oil pump capacity of the spraying gun; make sure the unit is clean and flat;

lPreheat the substrate to 35 and spray the primer. Dry it at temperature of 120~150 for 10min-15min. Keep the thickness of primer within 12μm-18μm;

lSpray top coating after the primer is dry and cooling to room temperature, then spray the top. Dry the unit at the temperature of 100~150 for 10~20 min, and gradually increase the temperature to 380~420. Keep for 10 min. Keep the thickness of top coat within 10μm~12μm. The thickness of two coat tally should be between 20μm~30μm;

lThe oven (or the tunnel drier) must be well ventilated; otherwise, it will lead to color change of coating.

 spray paint ptfe non stick coating

Non-stick Type

↓Please click product model for more informations

ModelLayerThicknessCuring temperatureNon stick propertyAnti-corrosionAbrasion resistant
  Water based fluororesin non-stick coating  
  Water based ceramic non-stick coating  
  Silicone resin non-stick coating  

 Water based non stick cookware PTFE coating spray PF-600 Water based non stick cookware PTFE coating spray PF-600

Our Services


1. Three times inspection in every production line.
2. We can provide technical support and free samples within 500 grams.
3. We can customize products according to your parameters or requests to meet your requirement.
4. For any other question, please contact with us.


Q: What is your MOQ?
A: 200kg


Q: Can I do an OEM?
A: Yes


Q: How many layer for coating?
A: Single, two-layer, three-layer for your choice


Q: Which base material can be used for?
A: Aluminum, Iron, Stainless steel, Carbon steel, Marble, Ceramic etc


Q: Can we visit your factory?
A: You are warmly welcomed to visit our factory, it would be our great pleasure


Company Information

 spray paint ptfe non stick coating Water based non stick cookware PTFE coating spray PF-600 Water based non stick cookware PTFE coating spray PF-600spray paint ptfe non stick coating