|Payment Terms:||L/C,D/A,D/P,T/T,Western Union,MoneyGram,Paypal|
|Supply Ability:||2000 Set/Sets per Month|
|Place of Origin:||China|
|Product name:||long range gold detector|
|Detecting Depth:||5-50m at least gold detector 10 meter depth|
|Sensitivity:||High sensitivity metal detector|
|Rechargeable Battery:||Continuous working 48 hours|
|Delivery Detail:||7 days|
|Packaging Detail:||1set/ box|
RADIERII gold detector 10 meter depth long range gold detector 3d metal detector
Application: mineral lode searching, field exploration, archaeological research, treasure finding
· Detection of underground metal (mineral) position, size, and depth
· Pinpoint six kinds of metal mine: copper, silver, gold, lead, tin and Diamond
· Search range: 800 meters (radius)
· Measure depth: down to 10 m
· Handheld receiving antenna
· Power supply: 9 V DC rechargeable battery
· operation humidity: 0-95% (no condensation)
· Storage temperature: -40 C to + 85°C
Package size: 54*17*50 cm, weight: 6.5 kgs
Resonance occurs when an element absorbs energy same to its physical frequency. This theory is adopted in the remote sensing metal detector system. It transmits a stable radio frequency signal and receives the back signal in order to locate the precious metal object.
It is characterized by searching fast over super large area and depth. Its signal can penetrate in mountain and pass through rivers. It can detect gold(Au), silver(Ag), copper(Cu), lead(Pb), tin(Sn), and jewel. The detector can transmit and receive signal in a large range. The detection radius length can be over 1000 meters. The signal can penetrate 90 meters in the mountain without attenuation. It can detect one piece of silver coin buried in depth of several meters.
Mineral lode searching, Field exploration, Archaeological research, Treasure finding, Gold Diamond Gemstone detecting
HOW TO USE
-To field test the system, place transmitter on the ground, connect transmitter with transmitting antenna. Plug one end of connector into the corresponding receptacle on antenna and the other end into the antenna jack on transmitter.
-Dig a small hole about 10cm deep to inject the copper rods in the ground. In hard and dry ground, you can water slightly to prevent any damage to copper rods.
-Bury test object( gold, silver or copper) about 30 to 50 meters from the transmitter.
-Set the target selector to the desired target.
-Set the tuning knob to middle position.
-Never plug in or unplug antenna while transmitter is on. Otherwise it will cause damage to the system.
-Connect the receiver with receiving antenna. Power on the receiver.
-After 5 minutes, holding the rods, as practiced, walk a circle around the transmitter, staying about 5-10 meters from the transmitter. Make sure the receiver and receiving antenna are on.
-When you are on the line between the antenna and the test target, the rods should cross (As you can see on Picture A). At this time the signal line is generated between transmitter antenna and the test target. Marked where the rods cross. As you pass over the line, the rods will uncross (As you can see on Picture B).
-Choose one method to track the metal target.
-Do not add any metal or test objects to the area being tested while transmitter is on.
-To get better test result, you can adjust the frequency with Frequency Tuning knob. Note: Each time after you adjust the tuning knob, you’d better wait a moment before re-starting the test.
The operation of this remote sensing detector is simple. Mastering the use of this detector may take some practice. But it is important for getting a successful detection result.
One transmitter with battery installed
One charger for transmitter
One transmitting antenna
One piece of connector for transmitter and transmitting antenna
One receiver with battery installed
One charger for receiver and receiving antenna
One pair of receiving antenna
One piece of connector for receiver and receiving antenna