For research, testing and quality control in the use of inks, coatings, viscose and various emulsions. RK suitable for the development of color stick paper, cardboard, plastic film, metal foil, etc.
1.prepare the appropriate size of the base for proofing.
RK company can provide two kinds of proofing paper for proofing (500 pieces of a package, half of the proofing paper for light paint, and the other half for non gloss paint)
For small - imprint bed, specifications for 12 * 21cm
For large - imprint bed, specifications for 18 * 31cm
2. put the base material on the impression bed with a clip.
3. select the appropriate type of coating stick (please refer to the relevant information), put on the impression bed, close to the clip.
4. for proofing paint or light oil on the place close to the clip, under the coating stick about 1cm. (master dosage by yourself)
5.Hold both ends of the bar with both hands, Pull the bar to the direction of the operator at a constant speed and pressure, without rolling it.
6.After proofing, put the stick into the appropriate solvent to clean, wipe with a cloth. Note that the bar should be kept in a dry state.