|Payment Terms:||L/C,D/A,D/P,Western Union,Paypal|
|Supply Ability:||50000 Kilogram/Kilograms per Month|
|Other Names:||Epoxy Resin|
|Place of Origin:||Guangdong China|
|Classification:||Double Components Adhesives|
|Main Raw Material:||Epoxy Resin and Hardener|
|Usage:||crystal photo frame, cross-stitch frame, painting frame|
|Type:||AB Glue Epoxy Resin|
|Product name:||Crystal Epoxy Resin|
|Material:||Epoxy Resin and Hardener|
|Hardening conditions:||25 ℃*8H to 10H or 50℃*1.5H (2 g)|
|Certificate:||SGS, REACH, Rohs|
|Shelf life:||6 Months|
|Usable time:||25℃*40min (100g)|
|Packaging Detail:||5kgs per bottle, 20kgs per carton 20kgs per barrel 200kgs per barrel|
Clear Epoxy Resin AB Crystal Glue
Epoxy resin 312AB-6 can be cured under normal temperature and low temperature, with good flowing property, natural defoaming, anti-yellow, high transparency, no ripple, bright in surface, it also can be cured faster at elevated temperature.
Properties before Hardening
|Viscosity (25℃)||2000-4000CPS||100CPS MaxCPS|
|Mixing ratio||A: B = 100:33(weight ratio)|
|Hardening conditions||25℃×8H to 10H or 50℃×1.5H(2g)|
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ℃, please heat A glue to 30 ℃ first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
Properties after Hardening
Hardness, shore D
Withstand voltage, KV/mm
Flexural strength, Kg/mm2
Volume resistivity, Ohm3
Surface resistance, Ohmm2
Thermal conductivity, W/M.K
Induced electric loss, 1KHZ
Withstand high temperature, ℃
Moisture absorption, %
Compressive strength, Kg/ mm2
1,The operating environment should be ventilate and should keep away from fire. Closely sealed after use.
2, Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake.
Storage And Shelf Life
1, Store at the tempestuous of 25°C or cool and dry place. Avoid from sunlight, high temperature or high humidity environment.
2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C.
Shenzhen Jinhua Electronic Materials Co., Ltd. is specialized in epoxy resin and hardener with Secondary processing of high-tech enterprises.It is one of the most professional supplier of epoxy resin adhesive in current.And it is the most competitive, our company integrates R&D,development, production, sales and service into one of the professional firms. It has a more than 2000 square meter factory at pressent. Equipment introduction adopts international advanced technology and standards. Refer to excellent formula domestic and abroad, with high-performance raw materials in the United States, Japan, Germany and other places. All aspects of production have been strictly performance, environmental protection, health indicators test, and through the national authorities to detect certification,meet in the domestic industry-leading level.
Our company mainly produces crystal glue, epoxy resin adhesive, electronic potting glue, solar accessories, board resin glue, adhesive and other special grinding and etc...
Our company all stuff will uphold "honesty, harmony, innovation, rigorous" enterprise culture, adhere to the "management step by step, the eternal development" concept, constantly strive to forge ahead, innovation, all for customer needs as the center; all customers for the development of power; all customer satisfaction as the starting point; Jinhua hand in hand together with you, create brilliant!
Packing & Shipping
1, Why Choose Jinhuaglue?
1) Jinhuaglue owns ISO9001-2008 audited factroy of 3500sqm, all the materials are offered by factory directly.
2) Jinhua has R&D team, we accept OEM, and small order is acceptable
3) Jinhua has already ship to over 30 countrys, aboudant experiecnce on the exporting.
4) Jinhua with output of tons per day, ensure the fast on time delivery
5) Jinhua keeps all the samples for each shipment, so that to make the quality trackable.
2, What Kind of Quality Certificate Jinhua has?
3 Do Jinhua has MSDS for shipment?
Yes, we do have MSDS for shipment all all our epoxy and PU resin