Double-Sided Coating Trough Screen Printing | Emulsion Channel | Channel Dual edge (both thick and thin) design permits coating emulsion thicker or thinner on the screen. Thinner coats are usually desirable on higher mesh count (200 and above) for half-tones and finer detail like 4-color process where thicker coats are usually used for spot color on lower mesh counts (below 200).
Made of Durable Aluminum with Plastic End Cap Guides Dual Edges (thick & thin) Design With plastic cover.
Easy & comfortable handling Controlled coating deposit Uniform coating of emulsions and blockouts Designed with high quality aluminum material
Dual edge (both thick and thin) design
Plastic ends are permanent for easy cleaning and no leaking
Choose a coater
Which Emulsion Scoop Coater Size Should I Use?
The most screens are measured to the outside diameter and there is about 4 inches of screen frame that doesn't need to be coated. For example: A 20x24 inch screen will only require a 16 inch scoop coater. • 14 Inch - use for 18" x 20" screens. • 16 Inch - use for 20" x 24" screens. • 18 Inch - use for 23" x 31" screens. • 20 Inch - use for 25" x 36" screens.