|Payment Terms:||L/C,D/A,D/P,T/T,Western Union,MoneyGram|
|Supply Ability:||200 Ton/Tons per Month|
|Other Names:||Silicone Sealant|
|Place of Origin:||Shanghai China|
|Main Raw Material:||Silicone|
|Usage:||LED Lamps seal; PCB board ,optoelectronic devices.|
|Model Number:||BESIL 9102R|
|Delivery Detail:||7 work days|
|Packaging Detail:||Part A: 310ml/pcs, 25pcs/box; We also can make packing as your request.|
Besil 9120 RTV ketone oxime type silicone adhesive sealant is a kind of neutral silicone sealant which can absorb moisture in the air at room temperature, and cannot be heated and solidified. It has good adhesion to the vast majority of materials, the protection of electronic products under harsh conditions.
The elastomeric properties of Cured RTV 9120:
a. Resistant to moisture, dirt and other atmospheric components
b. Reduce mechanical, thermal shock and vibration caused by mechanical stress and tension
c. Stable mechanical and electrical performance between -60-260℃
d. Excellent electrical insulation properties, anti-corona.
e. Excellent outdoor aging, the service life of up to 20-30 years.
LED Lamps seal; A thin layer of potting PCB board and optoelectronic devices.
(DC500V) Ω· cm
All of the above data were cured at 25 ° C and 55% RH for 7 days or after further testing. The data for secondary vulcanization is data after baking 168H at 200 °
a. Clean the surface thoroughly, keep dry and loose debris, Clean with a solvent.
b. Cut the tip off cartridge and attach nozzle to cartridge. Full the joint completely.
c. Sealant skins in 40 minutes, is touched dry in 1 hour and cures in 1-2 days depending on application.
d. Full bond strength is achieve d in 7 days.
How to apply
Apply a bead of Besil 9106 Adhesive/Sealant (see Handling Precautions) to one of the prepared surfaces, then quickly cover with the other substrate to be bonded.
On exposure to moisture, the freshly applied material will "skin-over" in about 10-15 minutes at room temperature and 50% relative humidity. Any tooling should be completed before this skin forms. The surface is easily tooled with a spatula. The adhesive/sealant will be tack-free in approximately 30 minutes.
After skin formation cure continues inward from the surface. In 24 hours (at room temperature and 50% relative humidity) Besil 9102 Adhesive/Sealant will cure to a depth of about 2mm. Very deep sections, especially when access to atmospheric moisture is restricted, will take longer to cure completely. Cure time is extended at lower humidity levels. Before handling and packaging bonded components, users are advised to wait a sufficiently long time to ensure that the integrity of the adhesive seal is not affected. This will depend on many factors and should be determined by the user for each specific application.
When using solvents avoid contact with skin and eyes, heat, sparks and open flames. Always provide adequate ventilation. Obtain and follow handling precautions from the solvent supplier.
Product safety information required for safe use is not included. Before handling, read product and safety datasheets and container labels for safe use, physical and health hazard information. You can obtain a copy from your local sales representative or Distributor.
USABLE LIFE AND STORAGE
When stored at or below 30C (86F) in the original unopened containers, this product has a usable life of 12 months from the date of production.310ml/tube, 25tubes/box;