|Place of Origin:||China|
|Model Number:||HDPE pipe|
|Length:||5.8m or 11.8m|
|Standard:||ISO9001, 14001, 18001|
|Color:||Black, White, yellow|
|Application:||Sand slurry dredging project|
|Usage:||Sand/slurry discharging pipes|
|Selling Units:||Single item|
|Single package size:||50X50X10 cm|
|Single gross weight:||5 KG|
|Package Type:||20" Cutter Suction Dredger matched HDPE pipes for sand/slurry discharging : Standard sea worthy packaging|
1. Excellent Wear Resistance:
UHMWPE material is regarded as ideal cost/performance abrasive resistant material in the tribology field. With extremely lower friction coeffient of 0.07-0.11, and good self lubrication, which enables the pipes to have good wear resistance;
2. Minimized Maintenance
With good properties of wear resistance,corrosive resistance,low temperature resistance, the UHMWPE pipelines will not need the daily maintenance of anti-rust,anti freeze,scaling cleaning,etc, which could save 95% costs for maintenance during the operation.
3. Saving Pumping Costs
with good self lubrication and non-adhesion, the UHMWPE pipes have coefficient of friction of 0.0065,meanwhile, the steel pipe is 0.013. Therefore, the flow capacity of UHMWPE pipes is more than steelpipes. Under same flow rate, the UHMWPE pipes could save 20% fuel for the dredgers.
UHMWPE Flanged Pipe
UHMWPE Flanged Pipe
UHMWPE Copper Mine Tailing Pipe
UHMWPE Cooper Mine Tailing Pipe
20" Cutter Suction Dredger matched HDPE pipes for sand/slurry discharging are continually extruded by special extruders and moulds. Here is the brief introduction of UHMWPE pipe production:
1. The UHMWPE powder will be melted together with a small amount of paraffin, carbon black in high temperature
2. Different pipes with different diameter and wall thickness will need to make different moulds.
3. the length of the UHMWPE pipes could be cut according to customers requirements
4. The color of UHMWPE pipes is the original color of the raw material, and it is specially processed during production.
The appearance of the UHMWPE pipe should be smooth, clean, even and without spot.
Both swievel flange and fixed flange is acceptable.
For a small amount goods that need to be delivered by LCL, polywood packaging is applied to protect the goods from scratching and damaging.
The other packaging method for LCL goods is wood pallet. The surface of the goods will be packaged with bubble plastic, the connection parts will be packaged with poly wood.
Shandong Buoy&Pipe Industry Co.,Ltd(SDBEP) is the manufacture of the DIN 8074,ISO Standard and PE Material Best wear resistant UHMWPE pipe for sand dredging.
SDBEP has 26 extruding lines for the UHMWPE pipe, with the ability to extrude DN50~1200mm UHMWPE pipe.
24 hours service will be offer for your any inquiry and request.