|Payment Terms:||L/C,T/T,Western Union,MoneyGram|
|Supply Ability:||50000 Piece/Pieces per Week static var compensator|
|Place of Origin:||Jiangsu China|
|Material:||Stainless steel/Carbon steel|
|Connection:||Flange/Connection tube welding|
|Working pressure:||PN10 PN16 PN25|
|Temperature:||-196 to +600℃|
|Welded Line Type:||Longitudinal|
|Certification:||ISO9001:2008 , TS|
|Packaging Detail:||wooden case, or according to customer's requirement|
Product name : Stainless Steel Expansion Joint
Connection : Flange/Connection tube welding
Flange standard: ANSI, JIS,DIN, BS, GB
Flange materials: Stainless steel/Carbon steel
Bellow material : Stainless steel SS304/SS316L/SS321
Bellow layer: Single/Double layers
Tie Rods material: Carbon steel
Place of Origin: Jiangsu, China (Mainland)
Brand Name: Daming
Model Number: DN15~DN1200
Length : As customer required
Certification: ISO9001:2008 , TS
Welded Line Type: Longitudinal
Temperature : -196 to +600℃
Working pressure : PN10 PN16 PN25
Medium: air,oil,water,gas, chemical,powderetc
Business Type : Manufacture
Daming Corrugated Pipe Co,.Ltd is one of the leading manufacturers of expansion joints and metallic bellows.
With over 15 years of experience in the design and manufacture of bellows expansion joint combined with our state of the art on-site facilities enables us to offer a wide range of bellows suitable for any application and design requirements.
This pipe expansion joint is simply a bellows element with end connections. Regardless of accessories, such as liners and covers, it will deflect in any direction or plane that the bellows will. It is the least expensive type, but requires that the piping be controlled as to the direction of the movements required of the unit. The pipe expansion joint should not be expected to control the movement of the pipe. If the piping analysis shows that the pipe expansion joint must accept axial compression, then the piping must be guided and constrained so that only that movement will occur.
This expansion joint will not resist any deflections with any force other than the resistance of the bellows, which is a function of the spring rate times the deflection amount. It is incapable of resisting the pressure thrust along its axis, which is the product of the pressure times the effective, or cross sectional, area of the bellows. Large diameter units, even with low pressures, can generate very large axial pressure thrust forces, which must be reacted by main and directional anchors. Otherwise the expansion joint will extend with disastrous results.
2.Easy installment and keep up
3.Resistant to medium and temperature, pressure
4.This product can greatly reduce vibration and noise, pipeline system but can not solve all kinds of pipe interface displacement, degree of axial stretching problems.
5.The material can be made according to different acid, alkali, corrosion, oil heat and other kinds of species to adapt to various of media and the environment.
6.Material is a polar rubber, sealing, light weight, easy installation and maintenance, long life, but to avoid contact with sharp metal instruments, so as not to puncture the sphere.
7.Without supporting bracket should use flexible stent, installation bolt tightened to use the diagonal method
8.Such as the pipeline pressure is too high, the application of limit bolts to both ends of the flange together.
9.Flange connection standard adapt GB standard as to other standards, can be explain. Level of the product working pressure 0.1-6.0Mpa.
Bellow expansion joint/bellows compensator/shock absorber
Axial direction compensate
100-2000mm or as custom request
Flange/Connection tube/Quick joint
Stainless steel , carbon steel , high-temperature steel
ISO9001:2008 / TS
Large amount of compensation and long life
1-10 days according to your quantity
Pipes with axial displacement by temperature or pressure changes
Heating and air conditioning installation
Hot water and fire protection system
Compressors inlet and outlet
Diesel engine sets/Pipelines/Turbines/Blowers/Vacuum pumps/Heat exchangers
Product details show
Who Are DAMING ?
DAMING is a family owned manufacturing company specialising in the correct design, manufacture and supply of stainless steel flexible hoses, bellows ,expansion joints and pipe fabrications for 10 more years in China.
Can You Manufacture Metallic Bellow Expansion Joint To My Requirements?
Yes, we can tailor our metallic bellow expansion joint to your requirements, just get in touch for more information.
What is axial deflection?
Axial deflection refers to movement of the expansion joint in regards to changes in the dimensional length of the
bellows parallel to the center line of the expansion joint.
What is the Role of Limit Rods?
There are always several limit rods on limit expansion joints or bellows. What is the role played by limit rods? Well, limit rods may be used in an expansion joint design to limit the axial compression or expansion. They allow the expansion joint to move over a range according to where the nut stops are placed along the rods. Limit rods are used to prevent bellows over-extension while restraining the full pressure thrust of the system.
Ways to Prevent and Minimize Expansion Joint Failure
There are various actions that can be taken to prevent and minimize expansion joint failure. During installation, prevent any damage to the bellows by carefully following the instructions furnished by the manufacturer.
After installation, carefully inspect the entire piping system to see if any damage occurred during installation, if the expansion joint is in the proper location, and if the expansion joint flow direction and positioning is correct.
Also, periodically inspect the expansion joint throughout the operating life of the system in order to check for external corrosion, loosening of threaded fasteners and deterioration of anchors, guides, and other hardware.
Are you the manufacture who do business via Alibaba Online Transaction?
Yes, we can make the deal through Alibaba Trade Assurance.
It means you will receive 100% refund of the Trade Assurance Amount for orders not meeting agreed delievery or quality terms.
What is your payment terms ?
T/T(30% initial payment in advance, 70% in balance should be received before shipment); Western Union, L/C at sight or Paypal.
Are you OEM manufacture ?
Yes, OEM is OK for us .
How about your Inspection & Packaging?
We will do pressure inspection of each goods before packaging.
Standard Export Wooden case or Carton box Packaging.
How about your shipment?
We can delivery both by sea and air. Such as EMS, FedEx, UPS, DHL, TNT, Less than Container Load, 20ft & 40ft Container.
Can we visit your factory in China ?
Very welcome ! You can fly to Shanghai ,Yangtai,Wuxi,Nanjing air port firstly,Yangtai air port is near our company most, then contact us ,we will arrange pick you up here .
Why choose us ?
We are the professional manufacture which produce bellow expansion joints ,flexible metal hose ,Sleeve /Rotary compensator for 10 more years in China.
100% QC inspection Before Shippment.
Best price based on best quality and best service !
Expansion joint Installation and Maintenance Guide
Do's and Don'ts ,from the "Standards of the Expansion Joint Manufacturers Association, Inc"
Refer to EJMA Standard for proper guide spacing and anchor recommendations.
NOTE: The manufacturer's warranty may be void if improper installation procedures have been used.
Pls let us know your detail requirements before quotation as follow
1. Normal Diameter
2. Total Length
3. Connection type : Flange / Connection tube
If it’s flange end ,
Flange standard :ANSI,JIS,DIN,BS or GB
Flange pressure grade
4. Materials : Stainless steel SS304,SS316,SS321,carbon steel
5. Working pressure, temperature
When there’re any size of expansion joints you interested in, please do not hesitate to contact us, and we will response to you within 24hours.
Since 1995, Jiangsu Daming Corrugated Pipe Co,.Ltd has grown up to be the leading professional manufacture of corrugated pipe, expansion joint in China. Our company is specialized in the design, manufacture, market and service of integrated solutions of flexible pipe connection. The headquarter of Daming Corrugated Pipe is located in Jiangyan City,Jiangsu Province,China, which is about 3 hours from Shanghai. We have over 100 employees,including 20 skilled engineers and high trained technicians. It has an area of nearly 12,000 square meters produce center and current annual production is valued at more than USD4,000,000.
Currently, Daming products mainly include corrugated pipe, flexible metal hose, bellows expansion joint, fabric expansion joint, rotary compensator,sleeve type compensator, PTFE bellows,fire sprinkler hose,stainless steel braid etc .The sales market and customers are across the world and products have been exported to Southeast Asia,Middle East,Europe and America ect where being highly relied on and complimented by customers in domestic and oversea.
Company produce flexbile metal hose in accordance with the GB/T14525-2010 standard production, has the advantages of light weight,small volume,corrosion resistant,high tempeture,high pressure, good flexibility, strong seal,and long life. We supply expansion joint according to American standard of EJMA ,ASME and GB/12777-2008,it can bear high pressure, various displacement , have large amount of compensation and function of noise reduction ,damping. The products in our company are ISO9001-2008 quality system certified.
Based on the pragmatic attitude of “Professional, Focus, Integrity”, we will consistently strive for excellent products, increase product content of science and technology, and supply customers with best products and services.