|Payment Terms:||L/C,D/A,D/P,T/T,Western Union|
|Supply Ability:||13000 Ton/Tons per Year|
|Other Names:||silane-modified MS Sealant|
|Place of Origin:||China|
|Main Raw Material:||Polyether|
|Usage:||Construction,Fiber & Garment,Footwear & Leather,Packing,Transportation,Woodworking|
|Color:||white, gray, black and beige|
|Keywords:||flexible sealant MS Sealant,Low VOC MS Sealant|
|Shelf life:||12 Months|
|Feature:||Low VOC, no silicone, without bubbles|
|Delivery time:||Sample 5~7 Days,order bulk,10~15 days|
|Clients:||FuYao Glass (FYG),XinYin Glass(XYG),VW, Mercedes, Volvo|
|Propetry:||Low VOC,UV resistant|
|Packing:||310ml cartridge, 600ml sausage, 200L/drum|
|Packaging Detail:||310ml cartridge, 600ml sausage, 200L/drum|
MS1353 Medium Modulus Multi-purpose MS Sealant
MS1353 isone component multi-purpose and anti-sagging elasticMS sealant; cured by reacting with moisture in the air, to form a permanent elastomer. It’s silane-modified sealant with the advantages of polyurethane and silicone sealants. it is a flexible sealant widely recognized as with the best overall performance, can meet the needs of adhesive bonding and flexible sealing for a variety of occasions. SEPNA MS series ismanufactured strictly accordance with ISO9001/14001 Quality Assurance System and related protection provisions.
Technical Data Table
VALUE of MS1353
White, gray, black, beige, transparent
≈1.4 (depend on color)
Good, no sagging
Tack free time
30 (affected by environment)
Glass transition temperature
Elongation at break
Interface displacement capacity
ISO11600 and JC485 standard classification
25% (Seams anti-displacement amount, 100%)
ISO11600 5 standard classification)
Class F+G (cement and glass)
JC485 standard classification
Class M+C+G+Q(metal, glass, cement etc.)
-40~90, long term;
120, 10 hours; 145, 1 hour
Note:The product has passed below test standards.
ISO11600-2002, Construction structure—Joint products
—Classification and requirement of sealants, class 25LM F+G
JC/T976-2005, Road and bridge joint sealant, class 25LM-MCGQ-A-K
JC485-92, Elasticity construction sealants for building window, class MS-1-MCGQ-A-K
JC/T881-2001, Concrete joint construction sealant, class I-N-25LM
JC/T883-2001, Construction sealant for stone, class I-MS-25HM
JC/T884-2001, Construction sealant for Color coated steel, class I-MS-25HM
JC/T885-2001, Mould proof sealant for construction, class MS-20HM-0
Directions for Use
l Surface treatment
Bonding surfaces should be clean, dry, without grease, oil and dust; for the surfaces difficult for bonding (such as PP/PE material) the bonding effect can be increased by applying primer.
l Trimming and finishing
Trimming and finishing must be done before surface dry time, and should do compatibility testing of the finishing agents or lubricants at first.
l Clean and reuse
Uncured sealant can be removed with proper solvent or cleaning paste from the tool and equipment;
Once cured it can only be removed by mechanical method;
Immediately cleaned with industrial hand cleaner and water if contact to skin;
The redundant sealant not used up should be sealed, and remove the cured part while reuse.
l Surface painting (if needed)
MS1353is available for painting before and after drying the surface;
A compatibility test should be done before painting;
The thickness and hardness of the paint layer may weaken the elasticity of glue, and the paint is possible of cracking.
1.Obtain a new windshield.
2.Remove the plastic surround side and top mouldings correctly.
3.Cut the urethane from the outside between the glass and the pinchweld.
4.Apply a windshield primer to the frit band.
5.Apply the urethane with an electric caulking gun.
6.Lift the windshield into place.
7.Push the window down around the frame to guarantee a tight bond.
8.Allow the urethane to dry.
Package & Storage
|Material||Polyurethane auto glass adhesive sealant|
|Color||Black,gray,maize yellow,white OEM Paste|
310ml cartridge, 600ml sausage, 200L/drum
|shelf Life||12 months|
|Storage||Keep in cool and ventilative place Temperature 5~25°C, humidity≤50%RH|
1.Q:Delivery time ?
A: Normally,delivery time of sample order is 7 to 10 days,
standard order is 15-20 days.
2.Q:How to get samples ?
A: Normally,Sepna offer our customer 1-2pcs or 50-100g free samples for quality testing.
3.Q:How to be Sepna’s distributor ?
A: As the growing of Sepna’s global business,we need to find more and more distributors and agents
worldwide.Sepna will provide the best solution and service for our partners.
For more information,pls contact our salesperson or call us:+86-400-882-1323
4.Q:Any OEM service ?
A: Yes. Sepna can offer the customer OEM label service,and will give the protection of the your right in your market.
5.Q:Do you have MOQ ?
A:Yes.Normally,MOQ is 2000pcs or 1000kgs.
Welcome to contact with me: