|Place of Origin:||Guangdong China|
|Application:||Medical device, House appliance etc.|
|Standard or Nonstandard:||Standard|
|Motor:||DC Brush Motor|
|NAME:||small size vacuum mini pump|
|Selling Units:||Single item|
|Single package size:||20X20X20 cm|
|Single gross weight:||0.05 KG|
|Package Type:||Packed by Blister tray with Carton.|
1. MPA2002T2 is a small size (53*12*21mm) mini vacuum pump which can fit with any small
portable medical and appliance devices.
2. It uses EPDM Rubber, POM Plastic and DC brush motor to ensure continuous working time
≥100hours, It's very suitable for the devices that work in intervals .
3. It has two configurations that provide different air flow rate. (Note that the higher air fow
configration bring higher noise than low air flow configuration).
4. Custom made is available for different parameters and performance.
|Rated Voltage||DC3.0V||DC6.0V||Food preservation devices, Wine aerator&dispenser , Red wine preservation device etc. Household appliances which require vacuum pressure.|
|Air Flow Rate||0.6~1.0L/Min|
|Life Time||≥100Hrs (Continuous)|
MPA2002T2 is packed with Blister tray and Carton.
1. Please ensure the input voltage meets the specification and make sure the power polarities
are connected properly.
2. Connect a filter to the inlet to block dust, fiber,water drops when the operational environment
3. Use φ4 silicone tube and Connect a silencer to the outlet for noise reduction purpose.
4. Make ventilation holes or slots on the bottom or side of device housing for heat dissipating is
5. Use a piece of thick sponge or foam to wrap the pump for installation would reduce noise and
6. To extend the life time, Suggest to design a control circuit include a pressure sensor to let the
pump work in intervals.
7. Pack and Store the pump well in clean, temperature and humidity controlled
place to avoid rusting of motor.
1. OEM/ODM services.
2. Hardware/software design for system solutions.
1. Is your company a pump manufacturer?
Yes, we're pump manufacturer.
2. Are your products RoHS compliance?
Yes, All our products are RoHS compliance.
3. What is your production capacity ?
>30,000pcs per day, >900,000pcs per month.
4. What is your quality control process?
Our company follow ISO9000 for quality management. We conduct
raw material IQC inspection, and conduct100% in-line test and QC
inspection, Also conduct OQA sampling check before shipment.