|Payment Terms:||L/C,T/T,Western Union,MoneyGram|
|Supply Ability:||3000 Ton/Tons per Month|
|Other Names:||tile binder,tile glue|
|Place of Origin:||Zhejiang China|
|Main Raw Material:||cement,sand,synthetic resin,special addtives,etc.|
|other names:||tile glue,adhesive|
|usage:||ceramic tiles for floor and wall,both for interior and exterior use|
|Tile Accessory Type:||tile adhesive|
|color:||grey or white|
|Delivery Detail:||Shipped in 4 days after payment|
|Packaging Detail:||packing:25kgs per bag,24 tons per 20ft. container.|
tile fixing adhesive ,shape:ready mix powder,color:grey,product performance:with excellent bounding property,weather resistant, crack resistant,
permanent heat resistance,easy to use,
usage:for indoor and outdoor ceramic tiles and mosaic tiles.
25 kgs per bag,24 tons per 20ft. container.
We provide with you not only free samples,but also technical support and use of tools.
ANT-201 good quality ceramic wall tile adhesive,tile fixing adhesive,it is a kind of portland cement based
adhesive,used for indoor and outdoor concrete wall,and cement mortar rendered wall.
1,excellent binding property 2,perfect weather resistance
3,good crack resistance 4,permanent heat resistance 5,easy to use
Scope of use
Used for indoor and outdoor ceramic tiles and mosaic tiles.
Base Surface Preparation
It should be solid, smooth, no crack, remover and other attachments,
It should be wetted slightly if the base surface is porous or temperature of it is too high.
1, pour the water into vessel and mix with adhesive and stir until it becomes uniform thick
paste, keep it still for 5 to 8 minutes, (the mixing ratio of adhesive to water is 25kgs to
6.0-6.5kgs),stir again and no need to add water.
2, plaster adhesive on base surface by dentiform steel trowel (the size of dentiform steel
trowel for ground is 8x8x8mm, and it’s 6x6x6mm for wall), cut it into dentiform stripes,
compress tightly the tiles on the adhesive,adjust the tile’s position in 10 minutes.
3, plaster the adhesive on the back of tiles,paste them on the base surface, the volume of
usage for the adhesive depends on the degree of roughness of base surface, as well as
the groove size of tiles.It takes about 3.5kgs to 5.5kgs per square meter if the thickness
is 2.0 to 3.0mm.
1, construction temperature is 5°C-35°C,please don’t construct in rainy day or under the
2, thickness of bonding layer should not less than 1.5mm,the ready mix paste should be
used up within 2 hours.
3, interval between adhesive work and other works should be 24 hours.
4, this product contains alkali, please be careful of your skin and eyes.
Storage and packing
This product can be stored for 9 months under seal in cool and dry place.
packing:25kgs per bag,24 tons per 20ft. container.
Delivery time:4 days after the receipt of deposit.