RTV Silicone Rubber Adhesive KN-300X
Silicone Rubber Bonding Silicone Rubber,Glass ,Plastic , Metal and So On
RTV adhesive KN-300X one component, ready-to-use adhesive sealants are extremely versatile.
It cures to be silicone rubber at room temperature by exposure to ambient moisture to form a tough,
elastic bond between cured type of silicone rubbers as preferably.
RTV adhesive KN-300X are standard strength paste consistency which can be applied
to bond silicone to Silicone, silicone to nylon, glass, clothes, plastic and so on.
It’s characterized by temperature resistance (-60~200℃), ozone resistance, UV-Resistance and electrical
Appearance : colorless and semi-transparent paste
Viscosity : 50000cps
Elongation : 400%
Hardness : 35A
FDA compliance (Food And Medical Grade)
Good Sealing Function
Once KN-300X is cured , it's silicone elasticity,
which is electrical insulation,vibration absorbant.
The Silicone rubber is damaged
when break off the bonding
Withstand water boiling tests
1, Cleaning material surface for bonding.
2, Coating adhesive thickness≤1mm
3, At least 30 minutes pressing, the adhesive is cured completely after 24 hours at room temperature.
Shelf life for 6 months, stored at 20℃-25℃ dry place, away from light and heat.
1, Need to clean surface for bonding, avoid the greasy dirt.
2, Make sure uniform pressure to keep bonded parts together.
3, KN-300X is easy to cure once contacting with moisture,
it must be stored in a completely sealed packaging and away from the away from light and hot.
4, Avoid eye contact adhesive,If contact, rinse with water immediately, then go to see the doctor.
5, Please fasten down the the caps after using to avoid the gel to be cured.